thanks kurmay
I got the program 1.98 from a friend today, it works verry fine.
i could make backups from my osp disks verry well.
if i compare it with the OSPFCv2_2.EXE, then the...
Type: Posts; User: phx
thanks kurmay
I got the program 1.98 from a friend today, it works verry fine.
i could make backups from my osp disks verry well.
if i compare it with the OSPFCv2_2.EXE, then the...
yes, i found the two switches,
now it works fine,
thanks alot for your help dcoupar :cheers:
Hello
i have a Puma 2500y with a fanuc 18itb.
after 3 years of regular working with the Maschine i wont to use the programableTailstock.
I bring the tailstock in position, then clumb, then pull...
I know thats written in the manual =) Just have a look there...
Hello
you can do it with G74.
Hello
I use CNC turning from OKUMA for 25 years now but I hardly ever use IGF. I also have a machining centre from OKUMA. However I would not buy it again- either milling or turning from Okuma...
hi there,
how can i take the zero point in Z aXis on an CNC88HS with a tool like this: Haimer GmbH - Universal 3D-Taster
thanks
what u want to say with this?
you mean 15.16?
omg, sorry i made a mistake, (chair)(chair) but not H is wrong, X must be 15,
mcr-b, we cut from 17 to 15, so thats 2mm = H
easy;-)
G97 SXXXX M§
G00 x18 z20
z5
G71 X17 Z-13.5 H2 F1.5 M33 M74 u 0.03 D0.2
you did not tell about material so you as to change maybe.
Other Applications ~ Horn USA, Inc.
you know you need the Option Polyturning?
hello motordude,
sorry i did not see it, i was not there when they moved the maschine in.
all this work was done by the Maschine seller.
greets
hi there,
i have a Doosan DNM 400 with Fanuc controler now since some Weeks
my opinion over this time is: the maschine is not so bad, with some things that are not so nice. 1.if you change the...
to be sure, spindel should not running to open.
1.if you had a part in for longer Time and it opens not the chuck, give mor psi
2. if its not open in normaly mode, i have had this on an Lb15 some...
when you buy a machine, order double the Tools, then they are not expensive.
75 mm = 2,952 inch
72 mm = 2,834 inch
del a.min ;C
Or just cancel the protection with "Protect" ;C
Don't you have a manual guide? It certainly stands inside there.
Hello
if some of you have a fadal cnc88 and a fanuc 0i, i am searching for a command
or a Macro to use the cycle L9400 on a Fanuc 0iM.
thanks phx
hi Geoff,
i dont know the REVO, but the Doosan Maschines that i know are Maschines
with good Qualitiy.
Fanuc: some People love it, some People hate it.
maybe he can use the command B60 ore so too.
thanks dcoupar,
this looks easy,
i hope this pic is from Fanuc control, i oredered with Fanuc, as it is just a little bit difficult to Fadal,
in 2 weeks we know more.
on the show they all had...
Thanks for the Answer,
the Service Tech form the Maschine show told me it was possible to bring back the tool always to the same pot.
i am al iitle bit afraid, as i dont know where my tools are...
hi there
i will buy a Doosan VMC DNM 400.
al the time before i only worked with a Fadal with a pick up Tool changer.
now i get a Maschine with a double Arm changer, do i loose a lot of time if...
Hello guys
I’m looking for a modular drill (48) by Carboloy. I didn’t msnsge to find anything in the internet. Neither I found anything on the Metav. Maybe the firm was adopted by another company....
hi trampus,
i think u was programming the Fanucs by G-code, also u can chose this way
on all Okumas, thats the way i always use on my okumas. the G-code is not so mutch different then to the...
M61 M62, can help maybe
Hi there
problem with Lube (Oil)
hi there
the 2. is with igf it has more free space then without.
without igf you have near 10K free, and some free on BB0.
regards
for me it works fine
http://www.cnczone.com/forums/showthread.php?t=60640
hello
have u changed to G98 (feed per minute)? to move when the chuck is open.
ist the maschine an older type? maybe i have an m code list from a ltc15 build in 1985, will check tomorrow on my...