Search:

"workpiece conveyor" = "part conveyer"

Page 139

Not sure this manual is for your exact machine but these mcodes may work.
...

I thumbed though that manual I did not see a list for m-codes. It should work with the common codes but there are also custom mcodes. Those you would need to get from the machine builder.

What do...

MELDAS 60/60S Series programing manual
https://drive.google.com/file/d/1F_kpZcRdwdNntyl8JUoYKdC8LHF1b6Rn/view?usp=sharing

What does "team offset" mean?

Try using the last offset (highest offset number) to remember the last count.

Take a look at 3201 bit #6.
Fanuc Series 0i MODEL F Plus Parameter Manual_B-64700EN_01
https://drive.google.com/file/d/1JUdMkYGtIuuWIGh1GPwj_TiogDhIsnQ5/view?usp=drive_link

https://manualmachine.com/

The way it works is. You make an account and you get a few points upfront. You spend points to download and get points from uploads. I uploaded my whole collection. I'm...

Looking for the make/ model of these chucks. Could also use mechanical drawings detailing hole spacing, jaw type, stroke and repair parts.

Interesting I guess you could use "H#4120" as well.

I had another idea but the implantation would be far more difficult. We have 120 tool magazines. Many times the tool cut time is less then the...

It not just having all the edits at the top of the file. It's that you change one variable per tool instead three per tool down in the program.



That would require a full time engineer on all...

We'er a job shop. We can run most parts in several different machines dependent on what's running. The issue with tool numbers is you never know what tool pockets are open. So you end up making...

I've founfd these to be the best countersinks. For manual use they self center and don't chatter. In production use in CNC they leave no face burr. Sadly they wear quickly. Looking for a carbide...

I'm making a part using B-Axis and Y-Axis. X always remains at zero and all of the cutting is done Y,B. Using a Fanuc 31i controller on a Toyoda FA630 horizontal. I had thought that radius...

Thanks for trying to help. According to Okuma's applications department. In order to get both orientation and servo lock of the spindle you need to have the Spindle Orientation option turned on.

488066488068

Pics added. Just need to lock the spindle so it doesn't move while clamping the part.

I have OSP700L, OSP7000L, OSP U10L and OSP U100L. A new job I'm putting in does not use the draw bar for clamping. The fixture has strap clamps to hold the part. I'm looking for a way to orient the...

Running feed mills the insert screws comes loose before the insert life has expired. I think it is the main cause of insert failure. I found that every feed mill suffers from this issue. Iscar,...

Is the spindle on when when you make this move? If so maybe you are in inch per rev. and not inch per minute.
G95 inch per rev
G94 inch per minuet

Been working with Fanuc's TLM. Seems to have only two ways of determining tool life. Number of cycles or time in cut. I'm thinking of something that detects spindle/axis load changes. But the load...

The book says it may be adjusted -9999 to 9999. For XYZ these units are in microns. What fraction of a degree is each unit worth for the B-axis for FA630?

Issues were numerous. The groove tool will have to be a special Iscar or Manchester groover. The RPMs are off the charts. When ever you are using roughing operations you must have rough stock...

See "Rant gibbs vs mastercam!" post I answered your question there. Sorry.

One reason is that MC doesn't charge for posts. The thing is MC posts suck compared to Gibbs'. Never understood why Gibbs never promoted their post engine more. I my mind it's what puts Gibbs ahead...

I upgraded to 2012 from 2011. In 2011 I could input 7/8 to get .875 for a dimension or feature distance but that doesn't seem to work anymore. Do I need to turn that on somewhere or is that feature...

It depends on the post you're using but make sure that the "prefer subs" box is unchecked in the operation dialog. Some posts always generate subs for repeats.

This is a 1946 Natco. We pull the old girl out about twice a year.

262744

Post your .vnc file or a screen cap of your part and the operation dialog box.

If I only have a finished model. I make a copy. Then pull the copy into SW and add stock that roughly matches the raw casting. Once in Gibbs change the proprieties of the solids making one...

It's not Gibbs so much as it is the post he's using. Have your Gibbs dealer alter the post to put out a full start-up stanza at the beginning of each operation. This may become a problem when working...

It could be that at 100IPM the controller can't keep up. My 15M Enshu vertical can't keep up with code like that but my Toyoda with an 18i has no problem. Check the spline tolerance in "Preferences"....