lol... me too
Nah, I dont mean to sound like a wanker, it's just Okuma do know me, and watch me. So I cant say too much about it.
Okuma designed the turret, but do they make it?
I cannot tell...
Type: Posts; User: kkungfu
lol... me too
Nah, I dont mean to sound like a wanker, it's just Okuma do know me, and watch me. So I cant say too much about it.
Okuma designed the turret, but do they make it?
I cannot tell...
Been thinking of how they could have possibly hit. Will check the machine out to see if when the B axis swings, does the corner of the turret swing out further than anything else, and if so does CAS...
Make sure they did the center offset adjustment correctly, easy check is to touch a tool in T1000 and T2000 and compare results. Should be within 10um.
If they havn't, you will have to offset tools...
Perhaps, i don't normally show ppl how to turn it off, and he didn't know how to.
Don't know why it did it, machine was only a week old.
Good stuff, yours works, wish the one I had to fix did that.
Im talking about the back of the turret, not the tool
Confident? Set your turret vertical T2000 and go as far as you can in Z- and do a T3000. let me know how you go champ
CAS will stop it if is traveling in a linear motion, but CAS wont stop during turret index. I've seen it up close to the limit in Z- minus and index into the wall!!!
They took a week?!?!? did they...
Mori ladder password is usually "L".
EX alarms are ladder generated, therefore machine sensor, therefore probably a faulty prox inside turret.
You can check prox status in DIAG screen. Just...
When you say you put the tool into the side, did you mean you put T1 into the pot labeled 1?
If so, you have done it wrong. Tool numbers and ATC Pot numbers are different things. Usually, you load...
+- 0.005"? seriously? thats 127 microns.... Wow, thats huge between parts.
Something definitely wrong there, If it isn't the G40 Tool nose comp, then it is something else in programing or param...
Yea... mostly salesmen who wouldn't know the arse end of an allen key would promise the customer something and expect service to deliver.
Luckily, we had a couple of the Hitachi guys move over to...
me 2!!!....shhhh
CAS..... oh dear
It will stop from crashing a tool during turret rotation, but it will not stop the back end of itself from hitting anything, as one customer found out when the back end went...
correct, sorta..... It was 2003 I think
But yea, Mori service will fix them now. Poor service guys have to go to a custumer knowing nothing about Seicos controls and be expected to fix them. But...
Hi all
SL-60/3500 with MF-6 (16TB)
I've had one of my customers clear all his paramaters by accident trying to cancel the overtravel on boot up.
Ive managed to enter everything back in (NC an PC...
Hmm, 7000 is a little tricky. I think you would have to go to OS mode and patch the servo file. (MD0A:SVLUA01-BB02-A.PBU file)
Let me do a little research for you to find the sector to patch.
Try swaping the auxilary N/O contacts on the contactor itself. There should be a spare one on the other side of the large contactor. This is an input back to the SPU to tell it the change over has...