Hello
These details are not enough- what machine, controller have you got?
Does it happen with every single program or only particular ones?
Are there any other (more exact) error messages?
Type: Posts; User: bullet01
Hello
These details are not enough- what machine, controller have you got?
Does it happen with every single program or only particular ones?
Are there any other (more exact) error messages?
If the license had a timely limit attached to it, then I would say it’s pointless to re-install the software.
Hello
Is the cable directly connected to the machine and to the computer without a router? - > then it has to be crossed!
Is the IP knows to the machine?- code number "NET123"
Then simply...
You will need a 4th aces for that! How do you want to program it without multi axes?
Hello and welcome to the CNC arena
When do you get error 401?
Reset when changing tools is bad, you have to allocate the tool again.
I need to have a look tomorrow how it works.
But you could...
You have to enter the lowest diameter that your chamfer really has, then it should work!
Hello
With the one that you define at the bottom!
Hello
What aluminium alloying have you got?
Do you use standard inserts or special aluminium ones?
Hello
Do you want to countersink or simply engrave a pocket?
Hello
Where do you get all these machine names from?
Are you looking for a new Machining Center or what are you planning to do?
Hello
You won’t get anything useful for 600.-€,
Hello,
If you use the search function here in the forum you can find a lot of stuff about HH programming.
Hello
That works! You just need to make sure that the surface normal faces the correct direction...
Hello
I am not familiar with Alphacam but I know from other systems that you have to allocate the folder from which is should start or where the controller should store the particular...
Hello
could you post the program in here?
so that we can at least exclude
there are no errors in the program
Hello
Go to Settings -> Other,
Push the button on the tool list
and there is the tool list template.
Then you can go back to the editor
then the txt. opens,
which you then may adjust as you...
Yes you are right,
I just received the info from the dealer,
it is a battery alarm,
But the memory overflow must be another problem...
No, unfortunately not.
There is only a flashing light in the alarm window APC, nothing else...
Hello
The alarm "APC" flashes on my Doosan Puma TL2000 with Fanuc 18i-TB.
Since that I also can’t transmit any programs anymore,
because the error message "memory overflow" comes up.
But the...
It’s no problem to enter the tool lengths: you have an offset button where you can enter the lengths or the different zero points. I never had to flick through loads of pages!
I can’t really...
Hello
I am pretty sure it’s a pure DIN programming... Fanuc is nit famous for its ready-made cycles...
Hello
I am sure you will still get spare parts and support for the Fanuc.
I don’t know about the Traub machine.
Please describe your course of action a bit more detailed.
Step by step so that we can understand it better.
Preferably with screenshots
Hello
Have a look if your programs are write-protected.
Because if they are you cannot change them.
Hello
Here a list of companies and their (CAD) programs:
http://en.wikipedia.org/wiki/List_of_CAx_companies
I think that the buffer is quite exhausted by the machine manufacturer; I don’t think you should mess around with it. If the FIFO buffer overflows, then you have a real problem!
-> Select menu
-> Extension to the right (softkey with the arrow wink.gif )
- Then you can choose which program you want to print and you're done.
Greetz MaGiC1981
You won’t hear about the small cutters. biggrin.gif biggrin.gif biggrin.gif
Why don’t you try it with a side milling cutters, how deep do you have to enter?
Is there a possibility to keep the milling options?
I would try it 0,1 infeed. The problem is that the material won’t be even everywhere due to the welding. Your miller wont like that!