Search:

1. Well, you could find a motherboard with an ISA slot. Chances are it will be older tech, might not make your software happy.
2. Check this...

OK. The spindle motor drive is a Minarik pcm drive board. The manual/cnc switch connects the analog input signal from the front panel pot or from the computer. Your test just proves the motor and...

I checked and pin 22 of the 25-pin connector on my Light Machines interface card is connected to ISA bus +5V through a fuse. I can't confirm the other pin assignments, such as pin 4 being a spindle...

Nth,
I will be back at the shop tomorrow and can do more tracing. But the schematic came from my tracing, so if I found that A is connected to B then I drew it, then I found C is connected to D and...

Started tracing out the J1 25-pin connector wiring on the ISA interface card. Here you can see how they originally drove and received the signals. So far no connections found for pins 8 and 9.

I wonder if this thread would have more participation if the title had said "Light Machine" instead of "Light Madhine".

Fastest1, thank you for that kind offer. But I think if you can, it would be better to find your local school robotics project and offer them any help you can contribute. I recommend getting...

The ProLight ISA interface card had address-selection jumpers on address lines A9, A8, A7, A6, A5, A4. It is not a Plug and Play board, so Windows will not detect it and reserve a block of addresses...

Its not a PCI card, its an ISA card, i.e. it plugs in on the ISA bus of the PC. The address range is set manually on a DIP switch. You may have to search through your Control Panel, checking all...

Got a motor on Ebay, opened it up. Here is the motor connector pin number, wire color, and when we follow the wire to its terminal inside the motor we find a label printed on the pcb or terminal...

Never got any help from Oriental Motor.

The mating cable connector for the drive is the AMP 770582-1.

Inside the drive, the 14 pin "motor" connector is mounted directly to the pcb. Pins 1,8,...

I was almost finished typing a realy long reply about how I don't like what the personal computer became once Windows was invented, then I clicked something and I lost everything I typed. Now I don't...

Just saw this thread. I am wondering anyone has found a pin assignment for the "motor" connector on the front of the KBLD 120-A, or knows the pin assignment for the KBLM5120 motors. I have the...

Yesterday, after I whined on cnczone, I received a very informative email from Mr. Henry at EMC. It turns out that I had been knocking on the wrong door. He has now fixed the links to their email,...

About five years ago, we gave some of our I/O boards to a Linux software developer in England who was going to write drivers for EMC. We initially had a workiing email address for him, but frankly...