Search:

1- as broby said , you got to resellect the program

2- OSP 5000 don't get a Wear page like a Facun control, but newer OSP like the P-200 got it

3- check the power supply, it looks that the...

play with the filter settings in mastercam , you will be able to reduce the code length
or you can use the split NCI C-hook to split the G-code to a certain file seize (it's 32KB max on the cadet...

1) you can't it's an option.... i hate this too , the only way is to run your first part in single block, so the rapid will slow down with the button

2) copy this to your program
G91
G50Z????...

for your door, check if one wheel are off the track, this is frequent on okumas

we got 11 of those and they all had door problems one day in their lives ;)

to get a true shape in 3D (.002 or better). be sure to get one with super NURBS and/or Hi-Cut options DNC-B is a very good option for large files on older control

the p-200 got enough memry to...

if it's a P200 control, be sure to switch the system link mode on

on the parameter page #41 set the line 7 set to on to activate the BF

your NC code should look like this if you use a sub to...

OK

the g0w.2 is the fast approach of the sub , it rapid to .2 from the face of the part in the main then feed to grip position

The G22 is the tolerence for gripping (we use soft jaw) to be...

PS . in the p200 control press the (!) it will pop up a page with a ton of information like G-code and M codes to help you in the process

here is how i program a stock transfer on our 370MW, pretty complex to only a simple transfer that you can program on 3 or 4 lines on a Fanuc....

...
NAT8
N1 T0808
N2 Z0
N3 M5
N4 M1
N6 M247...

swept 2D will kill every other toolpath , faster and a way shorter nc code

imho flowline is good but swept 2d is better for simple corner radius like this

----

x2

i got this too after the install of X5

i just plug my SIM in an other USB port , no need to reboot

we got 5 okuma milling here , the older one is a 1989 VR-40 that still run like the first day , we make part with some tolerances as low as .0002 pretty easily

for the mc-v4020 it's a tank, you...

x2 it's related and encoded with the machine S/N


generally they are 4x 3 1/2 floppy disc in a blue plastic box and this box is in the pocket inside the electrical cabinet

we got one MC-V4020 CAT-50 = coolant-thru unit since 2004, i have only good things to tell about this machine , really strong and rigid , reliable and easy to work with

you will realy love the...

simple

go to stock transfer
select the geo to transfer
click the original stock position (generally the back of the part )
enter the new position (transfered position)
in sub spindle position...

ou a st-hubert???
moi aussi je travaille la (aéroport)

it looks like a post issue

the post don't calculate the pullout

i got ADMAC and mastercam for programming our captain l370mw

ADMAC gives me a code that will work without errors but it's not as flexible as mastercam to control the machine

mastercam will...

we got 6 generations of okuma machines here, the new one , especially the L370MW captain are simply unable to do the job as it should

on the other side , our Crown lathe is literally a tank, .350...

just don't click the tip compensation on drilling toolpath....it's a direct crash, i can't tell why they release X4 with a bug like this......

but schedule programming is an option on older controller ;)

X2 it's the easiest way

if your machine is a 3 axis simply set WCS TP and CP to front in the WCS manager without any geometry rotation

they took the HST style layout for 2d toolpath


x4 is about 5x faster than x3

more stable than X3MU1

verify is improved

dynamic WCS and dynamic xform is very useful when you program...

x2 for disable hardware acceleration

looks like a video card issue

my routine is set as VC1= the first digit , VC2 = the second...


if a part is scraped , the operator simply go to the user parameter page and add-1 to VC1 to re-engrave the previous S/N

create each letter in sub-program then use VC, [vxof], [vyof] and goto to create your S/N sequence

it's a bit complicated but you can archive some good result

i got one but i cant post it here...

if the file is a solid and you don't have the solid option , you can't move the part


create some curves on the needed edges then create a new WCS then use it to create your toolpath ;)

why don't you just use swept 2D toolpath

your g-code will be exactly what you want ;)

tis a 2in ball with a 3/8 ball nose at .1 step over


/T254M6 ( 3/8 BALL ENDMILL TOOL- 254 DIA.-...

Superman is right

but on a lathe you only use V1 instead of VC1