I have not observed corrosion caused by glycol based antifreeze. Please provide data to support claim that antifreeze is corrosive.
What is "anticrustator" ?
Adrian
Type: Posts; User: AdrianPage
I have not observed corrosion caused by glycol based antifreeze. Please provide data to support claim that antifreeze is corrosive.
What is "anticrustator" ?
Adrian
No rust on mine when it arrived... or now. No grease either. Of course, I'm not basing this on things I read on the internet. I bought a Bodor and found out for myself. It's been 4 years now.
...
I got it sorted. It turned out to be a software issue. My Ruida plug-in in CorelDraw wasn't making files properly for engraving.
I contacted Bodor through a chat app on their website and had a...
I cut a cardboard mask to cover the entire table area with a hole the size of the work piece to be cut. The vacuum from my exhaust fan keeps the thin material flat.
Adrian
I've had great service from my laser as a cutting machine. It works great. I need to do some engraving now. (after owning the laser for years) I have not been successful. I can make the machine go...
Could be lots of things. Sounds like the tube and power supply are not the problem... A fault with your chiller would cause the laser to stop firing. See if you can find out how to eliminate that as...
Mine still works great. I've had it about 3 years now. I had a few minor issues at the beginning because I didn't know how to operate a laser cutter but customer service was great. Very helpful. My...
Sorry mate... I do not know. Air freight one in from China?
Adrian
Josh,
Yes I did buy it. It works great and the company has been great to deal with. I used Coles International to get the machine here. I would buy it again in a second from Bodor. Really good...
I couldn't see any compelling reason to choose the 6442 4 axis controller with less memory so I chose the 6332 because it has twice as many buttons to push. It also has twice the memory. The 6442 is...
Thank you for posting Emily. I don't know what "double plus scrap automatic typesetting" or "progressive feeding" means.
Adrian
I am about to order my laser cutter and I need to choose between these 2 controllers. I will be cutting balsa and ply model airplane parts. Can anyone explain why I would want one over the other?
...
How about we tape a $100 Wally World 5000 BTU air conditioner to a CW3000 chiller? Now it's a 5000 BTU chiller.(1466 watts) How many BTU's is the CW 5000?
Adrian
From what I can see the touch screen is model RDC6344 SHENZHENREADER TECHNOLOGY CO.,LTD
The RDC6332 has a colour screen but it has buttons for the functions. The RDC6442 seems the same except it...
Yes, it is most likely 3:1. I just mentioned it as having pulleys vs not. I didn't actually ask what the ratio was.
Adrian
Thanks for the post Mark! I'm told I don't want to go to a larger laser if I want to engrave anything with it. I'm also told I can have 2 tubes in the machine if I want so I could install a 60 watt...
Thanks Mark. I have specified the Ruida RC6332 controller. I'm not sure I want the touch screen version so that's the next one down as far as I know. I also specified the RECI z2 laser. All the...
How many people who have posted to this thread are from the USA?
Adrian
(Canada)
I need to purchase a laser cutter in the next week and I have been combing the internet since early April. I need to cut 6mm balsa and 3mm plywood for R/C model airplane kits. I have my eye on a...
Not having the correct gas mix would be a problem, but any shop that repairs neon signs would have the technology(1930's) to vacuum and refill a glass tube.
Sorry to revive an old thread but what is the procedure for refilling a laser tube? Vacuum out all the air and refill it with CO2, then seal it? Why would that cost any great amount?
Adrian
I'm currently in the same boat as you ...
Alibaba.com seems to be the best way to check out the Chinese companies. Look for them there. Once you find them, check out their company video. Some of...
Since we're here ... would you buy a Morn, a rabbit, a gweike or a Shenhui?
I want to import a single 600 x 900 laser into Halifax Nova Scotia. I have quotes from 4 laser cutter manufactures. The lasers are all about the same price. The shipping varies a bit though. One...
Hi there. I joined because I am shopping for a new laser cutter. I hope I can find information here to help me decide which one to purchase. I'm looking for a 24" x 36" with and 80 watt tube. I think...