Hi.
Please referance http://www.cnc-shopping.co.uk/a860-0360-v501-p-295.html
Type: Posts; User: BKCOM
Hi.
Please referance http://www.cnc-shopping.co.uk/a860-0360-v501-p-295.html
It depen on Keep Relay, designed by Machine tool builder
Hi,
Thanks very much but Fanuc Vietnam has bad service.
We don't like contact with us
Hi Friend.
We have CNC machine, use Spindle Motor A06B 1046 B251.
Now Spindle Motor A06B 1046 B251 was broken.
Anyone show me where to buy this one.
Can it replace by other Spindle.
Send me your email
My email : [email protected]
Dear friend.
We have Kasuga CNC machine center Quantum 1000.
It use fanuc 18iM.
Onetime unfortunately my worker delete all program include Tool Change macro.
Tool Change System is Arm Type - 24...
I setup Tapping Machine Kira, the same with your case
A06B-6093-H152 is IO link beta servo, you need reload all parameter before replace new battery, if you don't have A06B-6093-H152 manual i will...
Hi.
We have Mori CL 150 CNC Lather Machine.
It use M64 System, Now the main board was broken so we must replace the main board PCB and re-install parameter and PLC.
Any one know procedure for this...
It is easy if you have document of Mitsubishi controller,
and you must have M5PLC or GX Developer Soft ware
I have same problem with you.
It issues from Servo Drive, Control PCB board was broken, I see some IC component was burn.
I replace 03 drive for this problem with Fanuc OI MB System.
Goodluck
Dear friend,
I repairing Lathe machine MORI SEIKI CL20A MCS 518, use Fanuc 18 TB controller.
Now machine issuse EX 377 Error : TURRET COUNTER A IS ABNORMAL.
Anybody help me to solve this...
Dear friend,
I repairing Lathe machine MORI SEIKI CL20A MCS 518, use Fanuc 18 TB controller.
Now machine issuse EX 377 Error : TURRET COUNTER A IS ABNORMAL.
Anybody help me to solve this...
Dear All.
I prepare to upgrade milling machine use Fanuc 21 M controller.
I can program PMC ladder.
But i don't know the way to set up Analog Spindle.
I use Spindle and inverter not made by...
Hi.
Fanuc OTC can not backup with fanuc ladder III
Hi.
Thanks very much
I do not the way to turn off option for 4Th axis, could show me.
What is parameter to turn off 4th axis.
my email: [email protected]
Thanks and waiting your reply.
BKCOM
Hi.
Thank you.
I check voltage to driver is ok, 210V 3 pharse and 100V for power control.
I swapped drive Z and Y but machine still display this alarm 403 SERVO ALARM.
Do you thing servo card was...
Hello.
Any one help me with 403 SERVO ALARM on fanuc OMC system.
I checked SERVO drive is ok, cable from servo card to servo drive is ok.
I thing servo card was broken but i not sure because i do...
Hi.
PMC program did not lost.
You should take a PCMCIA card. Copy parameter and change the name to "CNCPARA.DAT"
Put Card into PCMCIA slot on CPU 16TB and read all parameter in to memory.
Goodluck
Dear All.
I repairing MAKINO BN1-85 CNC machine, Fanuc OMC system, non ATC it lost all parameter.
I replaced battery and setup all parameter(I/O, Servo, Feed rate...)
But I don't have option...
What is Meldas? M300 or M500 series ?.
The cable is the same with fanuc.
DB9(PC SIDE) DB25(CNC SIDE)
2 ------- > 2
3 ------- > 3
5 ------- > 7
1--4--6 6--8--20....
Hi.
What type of your ATC. Arm or Armless ?.
I have macro for fanuc OIMC.
I think you can use and adjust easy or contact with machine tool builder.
If you need please send me email :...
Dear All
I have milling- turning centre
Model: CKX5280
DATE 2005
CPU 840D (Simu Driver 611)
PLC S7300.
Now the machine issues Spindle Stop( 700028) alarm.
Anyone help me to solve this...
Hi Miggo.
You can find PMC parameter in PMC ladder program or contact with machine tool builder
BKCOM
Thanks
The machine is milling with 3 servo axis, 1 spindle, non ATC.
Best Regard
Dear All.
Anyone have parameter for fanuc 6m please help me.
I need parameter manual and parameter on machine to setup.
Thanks in advance
Dear all.
I have old machine okk with Meldas 86B controller.
The machine is now lost all parameter and language is Japanese.
I do not known the way to repair.
Anyone have document, parameter of...
Hi.
We are V-SERVICE ENGINEERING CO LTD in Vietnam.
I have only model B. If you need please send me your email.
My email : [email protected]
Hi Glennroe.
Thank you very much.
I have not experiment with fanuc 6m if you have document or picture to guide please send me.
My email : [email protected] or [email protected]
Follow your...
Dear All.
I have Fanuc6m system.
The DC motor was broken now i buy other motor but pules coder was difference.
The origin is B003 it mean that 3000 revolution now it is 2500.
How can I change...
Dear All.
I have SODICK A500 wire cut edm machine.
I can not transmit and received data via RS232 interface. I do not known why although i used cable same with fanuc cnc. operation follow with...