Thanks for your reply,
There was once a rotary table (B axis) connected to the control, but it isn't any more so I don't have any B axis,
the B is related to a table selection that is use in the...
Type: Posts; User: Tancuda
Thanks for your reply,
There was once a rotary table (B axis) connected to the control, but it isn't any more so I don't have any B axis,
the B is related to a table selection that is use in the...
Hi all, happy new year...
Hope you can help me on this one...
The machine is a jig grinder with 31i controller.
Here's a part of the program..
---
---
B100 (Select table 100, where are...
Here's a snapshot in the HELP of the conrol.
456714
Hi, well as you said, that can happen when you don't confirm the unloading of a tool.
Hers's what a tech from DMG sent me about that LL problem :
To clear the tool loading memory,
please run...
Hi all,
working on a 840d sl with shopmill, 5axes milling with turn table.
I want to find the best way to program 24 (could be 36) Pocket on the face of my part, at every 15 degree
It's a big...
Hi,
I'm making a small macro on a 840d sl, and I want to be able to do a feedhold, then switch to JOG mode,
move my axes an then go back to AUTO mode and continue the program at that position, but...
Thanks for the link Beefy, sure I will take a look at it. I need to know as much as possible to run that new Mill-Turn machine.
No problem Beefy, I'm not an expert but If I can help well it's a pleasure. I'm still learning too, I need to practice for the new machine that's coming in the shop here !
You can check here,...
Hi, to switch to inch, in jog mode or auto mode, click the little arrow on the lower right corner, it's just above the "Machining" horizontal softkey (if your in jog mode),
then on the "Setting"...
Sorry, not sure what you mean by "one path system"
I can program in MGi and out of MGi too, but the simulator is only on MGi
Thank Norbert
Updating my previous post...........
Here a test I made:
O0001;
#500=2.0
G0 X1.0 Y#500
M30
It went to X1.0 Y2.0, but the #500 variable still at 0 !!
Hi everybody,
I'm testing a macro with the simulator in Manual guide i,
and been searching in the books without help.
Actually, it will skip all my variable in the program (#500= x.xxx...
Same machine here, but never happened ! And I don't think there' a grease point for this.
Let us know what could cause this please.
Thanks
And if you do this (in red), do you think the goto will always go forward ? If yes It would be a step forward for you, as long as the program has no more than 9999 lines !!
n, spindle_off
n,"M1"...
I would try to add a check just before the first move in the program 9026 to skip tool change, jumping directly to M99 if the tool is already in the spindle.
I assume that the program 9050 contains...
I can't believe a tool change macro can't be made to avoid this alarm, that's ridiculous !!
I saw that same problem on a milling with a yasnac control.
Hope somebody can figure this out for you.
Ok, great
thanks BurrMan
Finally I can't play in the registry, but anyway, I'll wait the full version and then from there I'll let the technical service of Bobcad handle it.
Thanks guys
Thanks BurrMan,
I'll try to get that info in the registry by myself, if I can't, I'll have to ask for the tech again and it could take
some time (big company here...). Since we installed V28 and...
Thanks for the help guys,
at the shop all computers are locked, so we have to ask a tech to investigate, so I did.........
We did turned off (uncheck) the 2 add-ons that was in there, same problem,...
Thanks dertsap, at least I''m not the only one who had that issue.
Office as been reinstalled once, but I'll keep looking for more solution,
so if it's not a Bobcad issue, it will help me to...
Hi all,
I run Bobcad V29 in demo mode on a Windows 8.1 (64 bits) and Office 2010 Pro, and since the installation of Bobcad,
every time I start an Office program, I get a pop-up screen from Office...
Yes i can, but not at the moment, I'll do it as soon as I can
Thanks for your time
Yes in EDIT mode, did try left and right, and parameter 14700 #7MGI is 0, so Manual guide is enable....
No I can't see these softkeys on the screen !!
Hi all,
at the shop, on a 5 axis mill with fanuc 31i, the operator ask me if I could help him with the Manual guide i,
so trying to help him but my problem is that I can't see the START, CYCLE,...
Thanks everyone,
I think l'll just pause the program (#3006) and ask if the knob is at 100% !
Tried M49, but the program stops at the line with no alarm..
same thing with m48.....
Thanks rcs60, I'll give it a try today and let you know...
Hi all,
Machine: Kellenberger cylindrical grinder
Control: Fanuc 21i-Tb
I'm trying to write a macro for a grinding cycle, and would like to be able to
spin the workhead (not the Wheel), at a...