Search:

Does anyone have any recommendations for a replacement 40w tube for a 4th generation FSLASER hobby? I really don't want to spend $300 on their site. Thanks

Stefon

Hello:

I have a 1hp Jet dust collector with the 1 Micron canister upgrade. This works perfect for small cnc projects in wood. Is it safe to use this dust collector when milling ABS plastic?
...

I have a zenbot 2448 machine that has to motors on the y axis. (One runs slave). I have been stalling out when the machine is moving from one point to the other. It almost jams and then misses...

Hello, recently I have noticed that when using a straight bit my dimensions are more accurate on a profile cut than when I use a spiral bit? The spiral bit is always off around .02" on one axis and...

Probotix x90 Cnc

Probotix x90 with control box and dewalt router. I've had this for about 2 years. It works great, I'm just ready to move on to a bigger machine. I'm not trying to make a...

The v90 is no longer for sale

If I'm looking at doing some hobby work (10-20hours/week) on a cnc, would I be ok with the CNC router parts standard, or would I need their pro series. I would be working with wood up to 1.5" thick...

thank you very much for your help. I was looking for a plug & play option like probotix offers. Can you suggest a better option that has digital drives?

I was looking at the CNC router parts pro 2x4 machine. Is it possible to use the probotix unity controller and motors purchased from Probotix?

Thanks
Stefonr

So I finally outgrew my x90 fireball from Probotix. This has been a great machine to learn on. Over 3 years the machine has been awesome but I now realize it's limitations. I mainly cut hardwoods...

I've been considering a Romaxx or a Probotix Comet. Does anyone have any opinions on the two? I alreadys pc's dedicated to mach3, so the added pc and monitor from probotix don't really appeal to...

I am just starting off and was wondering if someone could explain to me the difference between velocity and acceleration. Also, what is the relationship between the two?

Thanks
Stefon

awesome, thanks for the help

I just ordered some 30 degree bits from Amana
http://imageshack.us/a/img109/5798/amana39.jpg

Are these considered engraving tools instead of V-bits?

Thanks
Stefon

"buy your second machine First" is a phrase I constantly run into here. I was looking into buying the Fireball v90, but I am concerned I will outgrow it fast. What are the general thoughts on the...

Ok, thanks for the quick answer.

So I have a this board by easy-cnc and I want to add limit siwtches. My question is do I connect the common ground between the switches to the com screw like the diagram shows or do I connect them to...

Hello:

I am new to cnc and recently purchased a used desktop with windows xp(32 bit) and a non integrated video card. Mach 3 opens and loads g code but when I press cycle start, nothing happens....

Does anyone have any information regarding the speed setting on the Hitachi M12VC ? What speed does each setting equal? I know the top speed is 24000 and the low speed is 8000.


Thanks
stefon

Hello:

I have been lurking around this forum for months now, reading and searching. I have downloaded all the software and slowly learned how to use it. I don't have the time right to build my...