Search:

I'll have to see where they are at

I've been having problem with my machine dropping tool during tool changes. the program will call out an M06 and the spindle will unclamp the tool before it homes to the tool changer height. I was...

I found a bunch of programming and shop manuals for this machine. I even have a VHS tape from Hardinge too

I cleared out my pm box

I'm in the process of opening up some some space in my shop and have decided to part out my CHNC I. all parts will be sold supercheap mainly cause I need the space. feel free to ask any questions....

Ive got schematics. I'll have to scan them into my computer

I took the cover off the X axis motor so I could get to the end of the ball screw. the shaft turns easily although I can feel a bump every couple of rotations. I checked the ways and they got oil on...

I swapped the chokes back to there original positions and the noise came back

I swapeed the the chokes for X an Y. the noise goes away completely and doesn't follow but still throw a gross positioning error on X at higher feed rates

I have had problems with the X movements on my mill since I bought the machine. At higher feed rate it would throw a gross positioning error. I recently had to replace the X board and noticed when I...

My bosch servo drive went out, machine started stopping in the midlle of a program with out any alarms popping up. I tried resetting the machine when I figured out that the moves on X axis were not...

"which come to find out my perameter list doesnt even include any tool library! when I have a 20 tool changer"

If I remember correctly program 0 is used for a tool or libray or you can just set...

I have an Interact308 with the 2500 controller and ran into a problem a while back. It would show all kinds of errors . the problem was one of the 24vdc power supplies was starting to fail

I use Bobcad to do my programming for the parts I run it has the ability to program in the Heidenhain conversational and I use Heidenhains TNC server progran to transfer files to the machine

I wish I had an extra thousand to buy the controller, like you said it would be nice to have some extra parts around

Patrick

I used to run a thread roller making all thread. and we would run cold rolled 1018 thru the machine. I wonder if machining the thread on a piece of hot rolled would be any stronger, at least the...

When the 24VDC power supply on my interact308 started to die it kept throwing all kinds of errors,"I don't think all of my hair has grown back yet" but thanks to machine tek he got me to check them...

George has a case waiting in Washington for him

Hey guys I'm in the Portland Vancouver area too

I dont know if this pump would produce enough vacumn for a vacumn table but I put it for sale in the classifieds.
...

Here the link for the control manual TNC2500 from Hiedenhain.
http://filebase.heidenhain.de/doku/oma_controls/CD1/tnc/2500b/gb/25358820.pdf

This one has a ControlTechniques Flux Vector Drive type V400.
I'm no sure how accurate the rpm are. I can check the rpms at a low speed
tomorrow and check them against the tachometer on the screen...

Hey guys I'm wondering if anyone here can help me. I have a 1990 Bridgeport Interact 308 VMC that im having some issues with. the first issue i had was the 24Vdc powersupply went bad. Ive fixed this...

Pedro I ran into a similar problem with my interact 308. I contacted Heidenhain and one of thier tech guys said that the Tnc 2500 is basically a Tnc360 used only by Bpt. use the same boards and...