I forwarded this information to the applications guy at my dealer and he is going to try on a machine in house. I basically asked him if I did it if it would void my warranty, didn't get a clear...
Type: Posts; User: charger19690
I forwarded this information to the applications guy at my dealer and he is going to try on a machine in house. I basically asked him if I did it if it would void my warranty, didn't get a clear...
Are you saying you have thrown your own version of O9876 in the control and it didn't overwrite the "hidden" one, but ran your code?
The single M97 in the O9876 is what I am trying to get out of...
O9876 is hidden even with the setting turned.
Thank you,
Mike in MN
Thank you for the response.
I got this from my reseller....
The header...
Hello all.
I have a Haas EC400 (brand new).
I am looking at developing a engraving cycle much like the G47 engraving cycle...well exactly like that cycle.
The problem is that I want the text...
Hey guys.
Bought a 1990 Mits DWC 90SB at auction. Took delivery of it yesterday in my small little garage shop yesterday.
First, Mitubishi isn't very customer friendly unless you pay their...
Thanks for the comments.
It will definitely be a learning curve, and I won it so it will be here in short order(auction special).
So I suppose I will be doing what any good programmer does......
That's a good idea. I will have to keep that in mind if I get into one...
Have to learn how to use it first....lol
Can run the crap out of a machining center but don't know much about EDM's...
Hello,
I have a small machine shop and have been mostly in the whole machining centers side of machining.
I am looking at possibly getting an older Mitsubishi DWC-90SB for burning a production...
Hello all...
I have been looking into getting into a cheap laser to do some engraving on aluminum.
I read that a 40 watt CO2 laser will have no problem blowing off anodize from aluminum, but...
I have the opportunity to get a Charmilles EF20-330 for next to nothing.
I am a CNC Milling Machinist and know nothing about EDMs.
The reason why we are looking to get a EDM is to burn a...
Fanuc OM-B
I need to do some drip feeding. While I tested it out if the control will play nice with the computer during Tape mode, I noticed it did not display the program as it ran.
I am...
Here is what I got so far for all that may need:
O9009(TOOL CHANGE)
G00G91G40G49G80M09
G28Z0
G28X0Y0
M6
G90
M99
Thats the problem, I am 3 hours away from the nearest guy that would read my chip.. They charge drive time both ways plus onsite..
Still investigating.
Mike in MN
I would love to play with this emulator also.
I have an old Fanuc OM-B that I am looking for trying to get another M code on.
Mike in MN
Sorry, forgot to mention...
We have an 8 pallet pool APC system on this machine, so I believe the pallet change macro may be different then the standard 2 pallet machines.
Mike in MN
We got a Nigata PN40 Fanuc 15MA and we lost the O9000s for tool change and pallet change.
It's a 1992 and from what I can make sense of the parameters there are 5 custom "M-code" programs defined:...
Well no go on Parameter 60 bit 2. Talked to Fanuc today, they gave the same reference but he wasn't sure it would work either. It didn't.
On a turn of events, finally called in circles and ended...
So I posted about hooking up an indexer on my machine trying to find an output M code and the MFin signal.
Here is the deal. Bought an 1989 Kia KV40A with a Fanuc OM Control from an auction.
...
So I posted about hooking up an indexer on my machine trying to find an output M code and the MFin signal.
Here is the deal. Bought an 1989 Kia KV40A with a Fanuc OM Control from an auction.
...
I actually did see this feature in the Haas book. Was nervous about how it worked. I did wonder if I could use it as a "trigger" just to index. Because I do have Custom Macro A and B on this machine...
That's a good point. I will call our dealer that handles Kia in the area here first.
Thanks,
Mike in MN
Thanks for the response Al.
I will try to search a bit more, the book says there is a M21/M71 setting for an M-Code, so I just assumed there was a way to access the MFin feature.
I may just...
I am trying to hook up a Haas Indexer control box.
I have been paging thru the Ladder for ever and trying to locate the MFin pin to hook up the indexer wires.
Can anyone give me a bone here?
...
So I have been reading a bit and wondering if I can get a little detailed answer.
I have an 1990 Kia KV40A with a Fanuc OMc control bought at auction.
I bought an old Haas Indexer with a...
Oh, I hope you didn't think I meant it was made in Canada, just that we got it from a Canadian company...:)
Anyways, I am not sure I am up to the challenge of playing with the wiring, but maybe...
Well the machine is from Canada, so who knows what they do up there...lol
Anyways, is this probably a hard wire issue, versus something that is driven by a parameter?
Thanks,
Mike in MN
Hello,
We got an older Nakamura Lathe with a Fanuc 10T Control on it.
We received it a year ago from which it was stored outside covered.
We have been fixing gremlins as we go, but one issue...
If you have a Solid, you can use Solid Layout. It does have a generic title block in Mastercam as the Default which you can change.
Making prints/drawing for manufacturing kinda sucks in Mastercam...
I have been watching this one for a while.
The only thing I would recommend is contact CNC Software directly. Your reseller is just that, a reseller that should follow some sort of rules and...