Search:

Im looking for the same thing

Ok, so after setting up a job, and boring the jaws, and inserting the part, and tailstock I all of a sudden get this 502 alarm. Which states "motor over load except spindle motor"

I have tried...

I do not believe it is a retrofit screen. Ok, I took a short video to show what is going on. There is a small "c" in the seven segment display on the mother board when it doesn't want to turn on. ...

So when you try and turn it on, it will show on the screen "input search" and then after that is on for a few seconds it will say "no signal". Does this shed anymore light on what it could be? I...

Ok, So I have a hitachi-seiki HT20 Lathe. Has the Fanuc 10 T control. In the mornings, when trying to turn the machine on, it takes 20+ trys of turning the control on and off to get it to turn the...

I have a fanuc 10tef on a Hitachi lathe. When you first fire the machine up, and then turn on the standby button, the hydraulic pump will turn on, but the actual standby light will not light up. ...

Hey Guys,

We have a Haas SMM2 that is now out of warranty. It is a 2 year old machine. We had a HRT160H installed on it when we got it new. It has been on the machine ever since. Recently, we...

MILL 5 - AXIS TABLE - TABLE HORIZONTAL it still wants to spin C axis -81.765 instead of -8.235. I dont get why its referencing from 90 deg with the part orientated the way it is.

Yea, thats what it is, is that to get the correct compound angle, you cant just move to the angles that are on the part, as the 5th table cant move in those axis, so it becomes a trig function. ...

MILL 5 - AXIS TABLE - HEAD VERTICAL

It looks like you created a surface and then did a surface pocket. The problem is the surface is not parallel to the surface I am trying to cut if you look perpendicular on the view you created?.

I had made a post last week, that sorta got confusing. So I decided to take another simular part and try it again. I drew up in SW the exact orientation of the machine so there is no confusion...

What it looks like it is doing is making the part normal to the Y axis when It is positioning. I don't get it, but that is what it is doing.

Sorry, I should of been more clear, my fault. And yes you are being helpful, I appreciate it. Here is a new mcx file with the orange face and I have a pocket toolpath on it.

Ok, watched your sim video. Very aweseom BTW. Ok, first thing I noticed is you are cutting the 45 deg face, not the compound face that is 47.2 and 6.061 face. Also you have your 5th setup as a A...

If I xform rotate the whole WCS 47.2 deg it puts the plane I want to cut coincident with Y. But when I post it is giving a C of 90 deg now. I dont get it. It shouldnt output any C move right? ...

Lets just say we are at top WCS. Then lets transform rotate 42.8 deg. That is what the code is outputing, therefore the correct plane should be coincident with the Y plane. But it is not. You...

Ok, so I attached a jpeg of the spindle normal photo without any B or C rotation. So we can assume that for the correct C Rotation, in Z normal situation to the part that if the C rotates correctly,...

The part has to roll past 45 deg. So the 42.801 would not be correct. Correct?

Yes when I set the compound view I created off of solid face to WCBS and view top it is correct machining orientation. When creating tool path wcs is set to top of primary initial wcs with the...

I have a simple 5 axis positional part. I have attached the some screen shots and the actual mcx5 file. I have the part positioned correctly in that the WCS is at the center of rotation of my...

I have a Hitachi Seiki HT20 with a fanuc 10 control that runs great. Now I have aquired a HS HT20S2 with a C axis and live tooling, a yasnac Lx3 control with the multi-seiki programing part.

...

Ok, so I have this block, and in the block is a through hole off center. I am drilling and boring from each end with rotating 180deg for indexing. I set WCS at top. C and T planes are at bottom...

All yasnacs, haas, i know fanuc 10 and 6 will recognize the xy position before the canned cycle line. Its just i dont see why milltronics doesnt do the same. I can adapt and modify post accordingly....

Got it. Man this makes it a pain compared to every other control we have in our shop. Thanks guys.

RW15 Centruion 7



Here is the program:

O0100
(NON KURT VICE JAW)
(G54 IS CENTERED BETWEEN BOLTS IN X)
(AND FROM THE TOP OF Y)

I bought a Hitachi-Seiki HT20S2 lathe from 2 thousand miles away. Had it shipped here on a truck. Hooked up power, then began to try it out. I hired a guy from where the lathe came from and he...

Changed the pulse coder and fixed the problem.

There is no gear changer on this machine. But for the heck of it I did try M41, M40, M42 and did not help. Do you know what diag number and what bits to look for in the diag page for the door...

I am not trying to be rude or anything. Sorry if it came off that way. I am just trying to learn this part of the software. Where if you had a part with flats every ten degrees or something. Can...