I have a customer of mine that had an issue with a custom built rod chamfering machine.
They had a complaint that the CNC would not load. The battery had died and they had not powered the machine...
Type: Posts; User: dpionk
I have a customer of mine that had an issue with a custom built rod chamfering machine.
They had a complaint that the CNC would not load. The battery had died and they had not powered the machine...
I have a daewoo dmh-400 that currently has a 6 pallet magazine changer on it and would like to remove it. Does anyone have a ladder program for this machine to just run with the apc? Built 2001.
I'll start at the beginning. I have a Citizen Cincom E32 dual spindle lathe. I started getting an EX118 Alarm which is a Back(Sub) spindle RPM error. This alarm occurs if the controller sees a...
I disconnected the solenoid and the Z axis is slowly traveling so this tells me there has to be something with the hydraulic system. when the solenoid is connected it increases the pressure on the...
I'm working on a CNC lathe and the main spindle axis will not stay in position. It gyrates back and forth ever so slightly so the controller is seeing a slight jump back and forth in the position...
The machine is a Mori Seiki SL-20. I have been giving the task of writing into the ladder of this controller for a part air detect in the chuck. You have to pull the eproms and write the ladder...
Sorry I should have also specified what I am looking to do with this program. I just need a simple program so that the drives will get their ready signal and I can run each motor. If you need any...
First I wanted to say I love your site. I read through it a lot but haven't had to ask any questions because usually I can find what I need.
I work for a small industrial electronic repair...