Hi...
I'm using ArtCAM Express to carve wood. I wonder where I can find / buy-routing bit for wood in the list of tools...
Type: Posts; User: ata
Hi...
I'm using ArtCAM Express to carve wood. I wonder where I can find / buy-routing bit for wood in the list of tools...
Thanks neilw20.
Hi.
Has anyone mach3 profile file for sx3? My pc was defect and I need mach3 profile file in mm.
Thanks.
Hallo.
I have cnc syil sieg sx3 and i will change the spindle with the super spindle from syil x4. Is that possible? Thanks.
Hallo, mein name is idalidul und lebe in indonesia. Ich suche eigentlich Infos von (mini/tisch, gut und nicht teuer) cnc machine um alu zu fraessen, fuer r/c-heli. Tschooooo ... waa ....
Hi,
where can I download the last release of gCam (linux)?
Thanks.
:D
Jerber, thanks.
It seem Mach2 can run better by Laptop Pentium III/498MHz/160MB. What is the different between the two, Mach2 and Mach3? Can I use Mach3 profile in Mach2? Thanks.:)
Hi...
can somebode answer me? I have old computer Pentium I/133Mhz/64MB but can display 1024x768pixels. Can I use this computer to run Mach-Software? :bat:
i have 3axissystem from xylotex with 260oz.in steppers. and i plan to build plasma/router 1200x700mm. my questions: is the motor strong enough for the router. my table 1200x700 mm is finish.. what...
Sorry, not arc welding but stick welding (dc inverter 60amps). I don`t know much about welding. Somebody can help me? how can I cut 5mm thick steel with stick welding?:o
ab und zu verstehe ich. haengt von d wetter a. glaube ich :-)
hi,
i have arc welder 60amps. how to modified it to work as cutter like plasma cutter? thanks.
Thanks for infos.
If I running the code (Mach3) bellow:
...
O70 T0 (USER DEFINED)
N80 G54 M06
N90 T0 M01
N100 S2000 M3 M41 M9
N110 G0 X-4.95 Y30.899 A00
N120 G43 Z7.0 H0 M7
...
Hi,
Can somebody help me, I need to know the maximal value of Feedrate, Plunge Feedrate and Spindle speed for SX3 (Mach3).
<SX3 is connected to PC with Intel Dual Core 2.80GHz, 512MB-Ram>
...
Blank, but you can open all dialogboxes from menu config. Writedown all configurations manually from the opened dialogboxes. Make new profile and change the value manually with the values from syiel...
Hi,
Somebody can help me, I'm looking for CAM software, that can create gcode for TurboCNC/Mach3 to work with rotary table. I use solidedge for CAD. Thanks...(wrong)
(chair)
hi,
somebody know...an application (windows) that convert se-file (solidedge) *.par to gcode-file...for Mach3,TurboCNC or EMC. Thanks.
Hi Frans,
I sent you my email to [email protected] yesterday.
Thanks.
Ata
Hi,
I use Mach3-Profile from SyilAmerica. I will calibrate the machine. Go to Settings-Tab and click the "Set Steps per unit"-button, write down a value e.g 5. Here come the confuse, is the value 5...
I used auto's petrol when I cleaned my X3. :nono:
jerry,
that come if i change bellow in turbocnc.ini:
MachineType=NoType
with
e.g. MachineType=SX3
here is my 1st pic, sx3 as plotter with mach3 (demo)...
Bubba,
I use standard usa keyboard. The axis is in a different configuration if a new from internet downloaded profile for SX3 is loaded (Menu:Configure|Load new Configuration...).
Hi,
By me are the keys in Jog Mode not correct. Left/Right jogs axis is:Z and Up/Down jogs axis is:X...etc.
Anyone know how to change the keys to:
Left/Right jogs axis is:X,
Up/Down jogs axis...
:) Test SX3 and Mach3 (demo):
- the Emergency's LED is light by Diagnostics-Page under 'Input Signal Current State'. LED is off if the e-stop is pulled. If e-stop is pulled i can not start the...
Hi everybodys,
I downloaded a Mach3 Ver 2.00's profile for the X3 CNC Mill from SyilAmerica. Shall i change the profile if i use only mm (metric)? And where must be change in the profile? Thanks. :)
Hi Alan,
is this, bellow, the step/dir signals, what you mean?
Hi, is somebody know, work linux EMC with Syil SX3 converse? Thanks.