Hi,
it can be done, but not recommended.
You have to find/measure the pin-out of the flatcable, and find a monitor which can handle the signal.
The easiest is to order a new one at Siemens,...
Type: Posts; User: Freddie
Hi,
it can be done, but not recommended.
You have to find/measure the pin-out of the flatcable, and find a monitor which can handle the signal.
The easiest is to order a new one at Siemens,...
Check the electrical diagram, and find the sensor/sensors for gearchange.
Locate them, and check them.
The fault is that the control the control looses the signal from the sensor... So either the...
Hi,
normally this is a result of a defective NCU/Drive (810D it's a complete unit).
So therefore this needs to be exchanged, and the backup loaded in again (by seriel), and typically by an...
Normally Heidenhains keyboards is very good quality...
But if you are interested in to try fix it your self, then you can do this...
You can disassamble the keyboard, by loosen a lot of screws,...
We have tried a lot of different adapters, but the one theres always works is this one:
Moxa Uport 1110
http://www.moxa.com/product/uport_1110.htm
We use it everybody in the company, for...