http://productionpal.googlepages.com/GP2.gif/GP2-full;init:.gif
Tired of worn-out pumps? Broken impellars, fried motors, worn bearings, seals, and diaphrams? Depending on your...
Type: Posts; User: ProductionPal
http://productionpal.googlepages.com/GP2.gif/GP2-full;init:.gif
Tired of worn-out pumps? Broken impellars, fried motors, worn bearings, seals, and diaphrams? Depending on your...
:drowning: Hey guys...if any OEM's or distributers out there need an experienced service tech please let me know. I just got laid off and have three kids to feed. I am willing to pick up a suitcase...
You could modify the post to generate +X movements and assign it to that machine alone so as not to affect g-code for other models. It is pretty straight forward and once it's done your're set.
I believe someone once told me it means "precision"....:confused:
I drug this dxf into Sigmanest and touched up the geometry a little to remove as many entity segments as possible...threw it on the waterjet and presto. I tried to post the nc file here as well and...
Looks like I'll still be turning wrenches...LOL! Oh well, I couldn't imagine jamin' 6 shows(including OZ fest) with Apocalyptica and then having to go back to working for "the man" anyway. Sour...
Hey guys...just looking for a little support from the machining community to win the opportunity to jam at Ozfest with Apocalyptica- just watch the video below and maybe I'll get in...thanks a...
Sorry...I just tried this one and it worked.
http://www.neardrymachining.com/Video/Accu-LubeSpiderCoolShort.wmv
http://www.neardrymachining.com/Vide...rCoolShort.wmv
Here is a video of SpiderCool partnered with an accu-lube MQL system for "near-dry" machining. It will also clear the table of chips at the...
The basic advantage of SpiderCool over P-Cool would be the "auto-drill" feature that sweeps between two points memorized on any tool you designate. It helps evacuate chips rapidly. Another advantage...
.250" 6061 Al Supplied by shop
Qty.1 = $300/ea
Qty. 36 = $16.55/ea
.250" 6061 Al Supplied by Customer
Qty.1 = $250/ea
Qty. 36 = $13.95/ea
...
After nearly a year of representing SpiderCool and trying to spread the word here I have found mixed opinions about the product...overall, I felt the obvious benefits would be better recieved in the...
I took a look at the part and am getting a quote done for you...
It will be tough to troubleshoot without a meter. I am not familiar with the machine/components, but you need to determine then if you do have bad fuses(possibly within power supply) or if the P.S....
Thanks for the purchase Singlephase...and thanks for the honest review in the Milltronics section.
Sounds like you still have control power and DC power for the encoder counts...I would check the fuses for the high voltage supplied to the drives. Also, with e-stop in there should be no power to...
Go to settings page and change PWE to a 1 (parameter write enable). Sometimes there will be a switch in the cabinet for PWE.
Average cost of operating a waterjet with one cutting head(approx $$):
Power & Water= $20.84/hr
Consumable Parts & Abrasive(1 1/2 lb./min)= $26.25/hr
Total approx cost being around $47/hr +...
There are many benefits to waterjet machining that are worth the expense of operation...it's finding the proper work for the machine. It is great for titanium jobs that yeild $$, but can't compete...
3" will be just fine...wall thickness is the focal point when dealing with pressure,
Outside of very fluent programmers who have complete understanding/control of their machine...MDI(Manual Data Input) should be left to service techs/maintenance personnel who perform basic...
"WAS JUST WANDERING IF THE RELAYS THAT TURN THE CAROUSEL GAVE YOU ANY TROUBLE. THE REASON I ASK IS THAT BOTH ARE USED WHEN ADVANCING THE CAROUSEL. THE FIRST ONE FIRES FOR DIRECTION AND THEN THE OTHER...
You might want to replace that battery with the power on...so as not to lose parameters. I am not familiar with this control necessarily, but this is a typical requirement.
Agreed...
The pic of finished tiles...it was hell trying to catch the pieces before falling in the tank!
I found this stuff...maybe it will help. It's for windows based pc SUB to Serial convertor application.
I've been wondering how the P-Cool holds up...any other issues? Repeatability? The machine actually alarms out if the the function isn't working? Does it still have LOC Lines to run with?
A better beer mug...I did these for a tile job in my basement bar area. I used four different tile colors to represent the glass, beer, background, and froth. I'll post a picture...
LOL! Sorry...here is the martini.
I have a USB to serial convertor software I'll try to post tomorrow...