Machinist code of Ethic's
Make a burr, DeBurr it.
Drill a hole that needs tapped, Tap it.
Don't leave it for the next guy.
Type: Posts; User: chippah
Machinist code of Ethic's
Make a burr, DeBurr it.
Drill a hole that needs tapped, Tap it.
Don't leave it for the next guy.
need program that talks to Mazatrol cam M-2 from mastercam
thanks Jade
got a manufacture even though they are out of buss
they got it thanks
need to know how Mastercam communicator sends .nc programs to Mazatrol Cam
m-2
Or how Mazak reads the file and how to input it.
DNC in, Tape in? cycle start does nothing.
any info greatly...
need to know how Mastercam communicator sends .nc programs to Mazatrol Cam
m-2
Or how Mazak reads the file and how to input it.
DNC in, Tape in? cycle start does nothing.
any info greatly...
got error message 145 - Drives not enabled
could not find in error list
any idea what the problem might be?
Heidenhain 530 mill say handwheel
D error .
says check param
mp7640.
how?
Have a Mazak VQC-20/50B w/ Mazatrol Cam M-2.
The automatic tool changer stopped working after the Emergency stop was used. The door opens, Z goes down to position, spindle orientates, drum rotates...
Have a Mazak VQC-20/50B w/ Mazatrol Cam M-2.
The automatic tool changer stopped working after the Emergency stop was used. The door opens, Z goes down to position, spindle orientates, drum rotates...
In Mastercam can I make a 2D print from a solid easily?
Does anyone else have this problem.
when useing the tool filter in mastercam X4 and posting
to my prototraks the filter puts G19's and G18's in the post
and that's fine. The filter make's the...
Found out I needed a Mastercam patch fix
then my files opened.
Found out I needed the Mastercam X3 patch fix
then my solid files opened.
How do I send an attachment with a message to someone
in this forum?
I'm trying to open in Mastercam X3 a .SLDPRT file
and I get a message saying "Cannot find Parasolid data in solid works file".
We do not have the solids option with our Mastercam.
Is there...
I'm trying to open in Mastercam X3 a .SLDPRT file
and I get a message saying "Cannot find Parasolid data in solid works file".
We do not have the solids option with our Mastercam.
Is there...
This print we have says Oberflache Rz10
Then it says Surface Rz3
what kind of finish is this in English?
How can I make different color text show up on the machine monitors
from within my programs?
I'm using ISO programs for my M32B Mazatrol and my Johnsford
lathe (Funuc Oi-TC).
For example
% ...
does anyone know a web page that has a sample test
for machinist's that you might see when applying for a new
job. Maybe someone has one at there job site which you
could E-mail me. [email protected]
I have been sending and receiving programs
between my PC and Mazatrol M32B Vertical
mill. Somehow the wires got ripped out and
now we have not been able to get it rewired
correctly. Any help out...
Thanks
Quess I'll start there- makes sense
HAVE TO SWITCH MY MAZAK RS232 CONNECTION FROM THE 9 PIN ON PC
TO THE 25 PIN ON THE PC.
Things not working now.
Have the mazatrol M32B control.
Also have the Mazak Data transfer program....
I have the mazak data transfer program and cimco. they both can drip feed.
My mach. says no dnc option. Thanks for you'r reply. I'll look into those params.
I can load files back and forth and run...
!
if I were useing Master Cam X I would select- Create-Curves-create curve
It will ask you to click on the surface and drag to the direction of the edge and it will put an entity or line on the edge...
was gonna try to help....but I keep getting a corrupt file message
I'm working with MX2
what machine you working with,
Fadal I hope
G Code .cam .gcd .nc pt4 (proto trak)
send you'r...
Does anyone know how to turn my DNC option on - for
the Mazatrol M32B
I have had to put shim stock temporarily to activate two proximity switches
on top of the machine spindle. The round proxy detector must be activating one or the other and I've had to manually push...