Search:

Depends if you want to use it for cam or not. We use Solidworks and OneCNC. Onecnc is easier to use than solidworks but solidworks you can do assemblies and it is a parametric model cad. Onecnc you...

Sorry for late reply had to check we use 3 wires only with xon xoff 7 data bits E parity 1 stop bit pins 2 and 3 crossed 7 straight because we are using switch box with 25 pin on box. machine end...

We have a sodick A320D and a fanuc wire cut we use onecnc software to program and use the built in dnc for both

Brt, It is a shame when a company has to try and run down another product to try to sell their own that generally shows they have a bad product. We have onecncxp we do molds we also have mastercam...

Hi Guy's

We use a software called Onecnc profiler from the same supplier. This allows you to have a start anywhere you select. It is obviously optimized for that. We automatically nest the parts...

The surfaces are protected the same in Onecnc 2000 we first used 2000 then immediately upgraded to XP when we realised how good it was. We have never had a problem selecting single surfaces and it...

We cut particular faces in Onecnc all the time thats why we use it all the time now instead of our Mastercam. We have both. We never blank any surfaces in Onecnc that is very important not to do...

Thanks Guys

Thanks for the tip. That is brilliant i see that it is in the explorer and you can do whatever you want. I used it in an email today. I seem to learn of new features every day that I...

We had Xcad which is Excalibur we tried to use it but the the 3d roughing which dosent work properly ruined a few jobs and cost us so much that we got rid of it and purchased Mastercam. We needed an...

We have a leadwell with a Mitsubishi Meldas 50 controller and we had a real problem getting the comms working until we found that there are two page settings if I remember correctly. There is a...

We have Onecnc and Mastercam. We have had Mastercam first for about 3 years. Two years ago we changed over to Solidworks for all the design from Autocad. We do a lot of intricate 3D tools and to use...

SRT
I have not seen the version that you mention. With our Onecncxp expert I have looked at it generating the simulated rendered machined model line by line of NC code. All you need to do is in...

SRT,
We recently got Onecncxp professional it comes with iges sat vda step and Rhino included for the price we did not pay for any translators extra. We use Solidworks with Onecnc and the...

SRT,
We use Onecncxp without a problem on dxf but really we always ask for iges as that brings in the whlole solid model plus geometry and all. DXF is really outdated these days unless you are just...

It seems strange that you would say it is the video card that stop the dialogues being repainted as we have around 20 other software packages including Solidworks and Autocad and don't have a problem...

The main problem is the interface being DOS and all the functions are like DOS also. They have been saying for years that it will be windows but when?. Because it is still DOS even the function keys...

We have it now but isn't it sad that it is still 8 years behind. It is crazy that it is still not Windows. We use Solidworks for our design and when we use Mastercam it's like stepping well back in...