Search:

Yes, I think you are correct, after you mentioned it, radius correction came to mind. I will give that a try tomorrow. Seems like it used to be called diameter correction, but the later versions...

Using a rotary 4 axis, I cannot set the feed rate for the "A" axis. As soon as the "F" command is issued the "A" axis seems to be the same feed as the "X" axis which is only 300. In the "X" axis...

Thank you, I will give it a try.

Thank you for latest upgrade also, I know it took a lot of work.

Using the 4th axis rotary mill machining. I am trying to make a small crankshaft as a model, and trying to machine the journal. Everything works fine until the cutter needs to cut below the center...

The motor will no longer jog, as soon as I hit the direction, it faults out, Over a a period of time I have had to lessen my acceleration and speed or the drive would fault out.

The motor does...

Previous to this check yes they were holding. I cannot use the machine because 2 boards are inoperative, I did not bother to untarp the whole machine. When I try to move this axis, the board...

Larkin,

The firmware is 2.6h, and when faulted out no power to the servo, free wheeling

i r machinist,

I am 28 NW miles from Uvalde, 26 miles SW from Camp Wood, and 25 miles E from Brackettville, on the West Nueces river. That will put you in the general area.

This set of...

Larkin,

I did not check to see if it was still holding when it trips out, I will be back up there Saturday, and let you know. Also the version number, I think it was 2.6 but will double check. ...

i r machinist,

I am about 120 miles west of San Antonio tx. Northwest of Uvalde about 30 miles. Out in the middle of nowhere, which sure is nice.

Larkin,


I am running 1200 oz servos, at 72 volts.


If you could tell me what you think is the problem, I will fix them here. It will take about 10 days round trip to Canada and back. Also...

I am in Texas.

I use a c-10 BOB from cnc4pc.

I use Mach3 as a controler

Having trouble with two Viper 100 boards bought last March.

One blinks red rapidly as soon as I turn it on, it got increasingly worse over a period of about 4 months on tripping out. As long as...

Your son is in college, and rhino offers an educational version which is fully functional. He would also add something to his resume if he added this skill to his college, lots of companies using...

Hello Larry,

I bought two if your drives this summer, one to replace a problem plus another to make my 4th axis. I am not running 12 volts, I am running 72 volts, and no matter what when I turn...