just about all the machines that use these timing screws come from Europe , the lead time for replacement parts is well over a year.
with out the screws no beer bottle in north America will get...
Type: Posts; User: holbieone
just about all the machines that use these timing screws come from Europe , the lead time for replacement parts is well over a year.
with out the screws no beer bottle in north America will get...
i can't help you with solidworks but here is some links that may help you and your customer.
https://www.asthomas.com/scripts/cms/gpeasy_new/index.php/Scroll-Ex...
write it by hand
G0 Z5
G0 X0 Y0 A0
Z1
G1 Z.5
X10.0 A360 F15
Z1
G0 Z5
X0 Y0
3/4 wrench and/or socket
this will get the spindle motor assembly off and get the ram off the base
4 bolts in front of the spindle
4 bolts going down on the ram into the base
a good set...
Glad to hear you got it running .
Holbie
i would also check the limit switches and the motor thermal blocks
check them for continuity , you may need to isolate them from the circuit
you may have 2 problems if the above check out OK...
If i remember correctly
Black card is the scales , the white card is the control , and the red card is the drives
The control needs completes the e stop circuit , so i believe thats why the machine will not energize with the e stop released
"I can hear a high pitched whine from all 3 servo motors" this is good
" I cannot hand crank any without substantial force " also good
looks like the drives are good and looks like they can...
" I have full control on manual over the +/- X axis " i'm going to assume you mean manual on the control vs manual by hand crank
if you can move an axis under power in one direction only that...
fist check all fuses , the drives each have a fuse
then
you need to trace through the e-stop circuit , if i can remember correctly it's the black and clear wires
it goes through the...
Software: Download area - HEIDENHAIN
download TNCremo
use a null modem cable ( and if your pc has no serial port you will need a usb to serial adapter or plug in card )
have a look at ajaxcnc.com
use one leg to the center tap
Ajax CNC Components | CNC Retrofit Control Systems for Milling machines, Routers and Lathes. Runs Mach3 or CENTROID Software
sounds like you just slandered " Leo Phan "
when you were making a contract with him was the demo hours included ?
sounds to me like you added them later , i wouldn't pay you
you still owe...
that's apt format it's what you would send to a post processor
Did you try these guys Fagor 8050 CNC Systems ? CNC Parts Dept
i'm guessing the reduction gears alone should keep the arm stationary
why did you format your hard drive?
sounds like you need to edit the autoexec.bat , there is a file it needs to run to start your control software
nickel stainless steel has a skin that's thicker then .0001 ,the more gummy the material the thicker the skin
i would have it ground , at a wall that thin releasing it from the jaws can put the...
there is no anti-backlash gear ,
not in what you are trying to do,
the anti-backlash gears should be called noise reduction gears ,
the anti-backlash gear part just takes up the gap to keep the...
you can make that part on a lathe in one piece
the cross looking thing in your pics is just the trimming planes
then you will need to reset the tools
you can use anything that repeates
SprutCAM , i don't think it matters if you put the offsets in , just the tool numbers and yes tool #'s are the same for both
some cam software needs a tool offset if it's tilting the spindle axis...
also if the tool is longer then the tooling ball the offset will be in the plus , if the tool is shorted it will be in the minus
master tool , yes you can use a tool for this and all the other tools will be referanced off that tool
using a tooling ball is a much better way to go , that way it never changes and all tools...
is anilam now acu-rite ?
ANIMLAM User Support :: Acu-Rite
i was going by the motors , look at this pdf
http://www.anilam.com/Uploads/File/Web%20site%20PDF%20Uploads%20August%2006/3000M.pdf