I have used these extensivly in the past. These will work with your tool changer but you have to be aware of the extra weight. Add the weight of the coolant inducer, tool holder, and tool. The total...
Type: Posts; User: jerryt1
I have used these extensivly in the past. These will work with your tool changer but you have to be aware of the extra weight. Add the weight of the coolant inducer, tool holder, and tool. The total...
photo did not come in but it is in my gallery if you want to see it.
http://www.cnczone.com/gallery/showphoto.php/photo/4393/cat/500/ppuser/68333
Here is the part. The part is being held in the chuck by the round end.The following code is ramp milling one of the...
We have had this machine for 4 years and never tried any milling with it. Now we are trying to figure it out and having trouble with cutter compensation. Round holes are getting oval using cutter...
This is a 2 part question. For ramping I use 100% speed and feed with a ramp angle of 3 degrees. When plunging, I use a 50% feed rate at 100% spindle speed int solid material with a centercutting...