Dear Sir,
How are you?
Today I have to discuss my one machine problem in detail.
Problem: System alarm 970 NMI occurred in PMC LSI device.
Fanuc manual said replace the main board PCB.
Type: Posts; User: Suleman Khosa
Dear Sir,
How are you?
Today I have to discuss my one machine problem in detail.
Problem: System alarm 970 NMI occurred in PMC LSI device.
Fanuc manual said replace the main board PCB.
Dear sir;
Your FANUC power supply module is failed.
Please repair or replace with new one after that your machine will run hope fully
Email id: [email protected]
Skype: Sulemankhosa...
Dear Sir,
How are you?
Today I have to discuss my one machine problem in detail.
Problem: System alarm 970 NMI occurred in PMC LSI device.
Fanuc manual said replace the main board PCB.
Dear Sir,
How are you?
Today I have to discuss my one machine problem in detail.
Problem: System alarm 970 NMI occurred in PMC LSI device.
Fanuc manual said replace the main board PCB.
Dear ganish;
C380 Motor not controllable
Cause of error
- Motor encoder cable defective . How i check it ? can you send me its procedure?
- Motor defective - How i finalize that motor is...
Dear ganish;
C380 Motor not controllable
Cause of error
- Motor encoder cable defective . How i check it ? can you send me its procedure?
- Motor defective - How i finalize that motor is...
Dear Sir,
How r u?
I have one CNC machine. Complete detail with model is given below:
Machine Model: 64V Linear.
Machine Maker: Deckel Maho
Dear Sir,
How r u?
I have one CNC machine. Complete detail with model is given below:
Machine Model: 64V Linear.
Machine Maker: Deckel Maho
Dear Sir,
How r u?
I have one CNC machine. Complete detail with model is given below:
Machine Model: 64V Linear.
Machine Maker: Deckel Maho
Dear Sir,
How r u?
I have one CNC machine. Complete detail with model is given below:
Machine Model: 64V Linear.
Machine Maker: Deckel Maho
Dear Sir,
How r u?
I have one CNC machine. Complete detail with model is given below:
Machine Model: 64V Linear.
Machine Maker: Deckel Maho
When I ON the controller then its started some times correctly and some times its stop at red leds 2 & 4. Manual said that both LEDs of SMEM & SFAIL. That time green lED 1 is ON.
please suggest....
Respected Sir,
We have CNC machine in which we are facing some problems related to PLC control.
Detail of Machine:
Maker: JohnFord
Model: SL-35
Dear sir,
How r u?
I got your email id from one website. I have one problem in my machine regarding that i need ur help.
Machine Name: Multi spindle drilling machine
Fanuc Control : 6M...
I checked the manual pulse generator & switch both are OK.
I need parameters list for fanuc 6m control.
Parameter for disabale and enable the MPG handle mode.
Email id is...
Dear sir,
How r u?
I got your email id from one website. I have one problem in my machine regarding that i need ur help.
Machine Name: Multi spindle drilling machine
Fanuc Control : 6M...
Hi,
I m suleman khosa, i need your help in one matter.
i have one CNC machine in fanuc 18i system was installed. When I On that machine early in tthe morning then its gave alarm of system 970 NMI...
i think there is problem of ROM or Ram in machine controller
Hi
I m suleman khosa and have one problem in our FANUC module of CNC lathe Takisawa TC-200(Japan).
It have one power supply module A06B-6110-H015. Maker of part is FANUC. When i ON the machine...
Can u send me bith drives datasheets then i read and give you decision. My email id is [email protected]. Please mail me then i back tou with positive reply.
"suleman khosa" <[email protected]> wrote:
Please give me the complete description of debugger function on the maintenance page?
Can i see debugger function at screen? or there is any...
I have machine name CNC wire cut. Model FX2 & maker of machine is Mitsubishi.
I have alarm of T237 ( No wire) detected but practically is connect.
I checked the limit switch which is for wire...
i have one cnc edm of mitsubishi. in which error of T237 no wire is coming. please help me. model of machine fx2