Hi havent been posting here for a qouple of years. The SP mill I had was retrofitted by a friend with new sepper motors and cotroller board from hobbycnc.com I really do not know where the machine is...
Type: Posts; User: smoregrava
Hi havent been posting here for a qouple of years. The SP mill I had was retrofitted by a friend with new sepper motors and cotroller board from hobbycnc.com I really do not know where the machine is...
Hi i dont have my Emco mill anymore. I have upgraded to a maho with a fagor 8055 control. So It is many years ago when I did this. But my emco info page is still up and going. Check that you will...
You find Electrical scheme on my maho page.
CNC files
And it is also some english manuals regarding the Philips Maho 432 controll
Yes if you have a manual in pdf it would be nice
The 3TRM2 Servo Drive has a card mounted directly on the inputs. The card has a Maho logo on. Do anyone know what this is? Is it a signal converter...
Hi folks I have now used so much time struggeling with my old Maho 432 controll but now I have desided to retrofit with a new CNC control. I have a Fagor 8055M CNC controller that I wil fit on the...
Hi Pirke86 have you had any luck on your retrofit. I will try to retrofit my Maho mh500C with a Fagor 8055 control. And since the servo motors and indramat 3TRM2 drive have worked nice all the time...
No I have never tried to see my 5V in a scope. But Whit my new memory card and CPU card and graphics card I still run on the same powers suply so If there was a fault on the power suply it should...
Ok I will try to dive into the file you sendt me have been a while since I have been thinking of this now. I'll come back to you if I have additional question. Maybe I will need a "hardwire a...
It have been a while since I have been looking into this but know the summer is over and I would really love to find a solution to this 7024 error. I have been in contact whit the produser of the...
I did not find a solution so I ended up buying all controller cards used from a newer machine. That costed me a lot of money. The controller start up and seems to work fine but I can't get my...
Hi I have now manage to find a new AC spindle motor and I have upgraded to a newer Maho 432 controll. The machine started up nice and I have entered parameters ( Had to guess on some because There is...
The Z axis servo motor is 1FT 5072 OAC 01 GA5 I think.
The x and Y axis is 1FT 5072 OAF 01
I believe that there is no brushes or tacho on these motors. I think it is 3 phase AC servosw with...
I have been thinking of connecting theZ axis to another drive. But first I should check that the servos is identical. There is no brakes on the other servos but that should not be a problem? As long...
"It sounds as though everything is ok until you jog the Z axis.After you have jogged the axis and the control has errored out,with the power still on"
Yes this is rigth. And when the error comes...
Thanks for fast answers
I don't have any PLC dokumentation files
The error comes when I try to move Z axis to reference point. I have tried to just jog the Z aksis and it moves a little and then...
I downloaded
ToolData
ZeroData
COMMData
PARTPROGRAM (Main and sub)
PCDATA
Is it possible to download the PLC program also?
the Parameter settings you listed here I belive is with 9600,7 databits,even parity and 1 stop bit. That worked for me
I see that on the aggsoft hompage it says
Parameter 5011= 11110111 (9600,...
Do you have any suggestions how I can find this PCA file?
I understand that this is the machine builder that should know this but seems to only have controll of the messages up to 7023. I Belive...
I'm also in the process of starting up a CNC machine ( Triax PF 4t) with a sinumerik 810 M controll. Have removed all errors and if I do hit Emergency button and resett to clear the alarm the...
Hi just want to join this. I conected to diffenent CNC controllers and you can make your own cable. you find your pin configuration here
DNC software. CNC and DNC settings for Siemens - Sinumerik...
No
I have had a couple of private messages. Thebodger@roger told me he was quite shure it was a Sinewave but not shure the level. And that the signals goes to the LM Board in the controller....
I have tried to set up a normal DNC to the Meldas 50 now but I have some difficulties.
I found the cable and I'm pretty shure its the cable that have been used before. It's a crossed DB25 cable...
Hi Is it possible to have a copy of your parameters. I'm going to uppgrade my Maho 432 controll to a later model. and will then be able to dripfeed I hope. But I belive I need to set the parameters...
I have checked the scales on my Maho mh500 c with Philips 432 controll. My scales is philips scales. The scale is marked PE 2480/00 and the reader is marked PE 2480/10.
Do anybody know what kind...
Sably it seems as I'm in the same situation here. I have had problems with my spindle drive ( Simoreg DC). Yesterday when I started up the machine this strange screen.
I'm trying to set up a Leadwell VMC 25 with a Mitsubishi Meldas 50. want to dripfeed the machine. Anyone have a free DNC software thats suits this machine. And I also need a pin configuration for the...
Hi there is no problem that you not have your MSD data. You can load your parameters manually
If you go into my Emco M1 F1P
http://www.smoregrava.net/emcof1p
I just uploaded one more file...
Maybe you could post your code here and maybe we could see the problem...
You just need normal ethernet cables into the nettwork. set up the IP adress at the fagor controll and insert the same ip in the setup in winDNC and you are ready. of course your computer most be in...
I find this thread very interesting. Because I have a Maho mh500C with a old 432 control.
I also have a small info page about the machine
http://smoregrava.net/Maho/mahomh500.htm
And as I...