I cant believe nobody has any input on this ?
Type: Posts; User: racetech
I cant believe nobody has any input on this ?
i have geko g540 4 axis controller.percission mathews mill with vfd running a 3phase motor.
i dont know too much on gcode been reading all i can to learn . i got all this stuff in a box and never...
hello all im new to cnc have ran a sign cutter plotter for years have alot of drawings i would like to convert to gcode,i use coral draw and flexisign and save files to dxf .i have a ton of vector...
Manual vfd pd001 set to 01
Pd002 set to 0
That’s the only setting that will turn spindle on and off on Mach 3 if I change them I only hear the relay click no spindle
Pics of wiring
Hi Mac I hooked up the eBay board like the wire diagram shows on a YouTube video the motor turns on and off in Mach but still no speed control like the geko the only thing that is better when I turn...
Ordered one and they are in Chicago not far from me hope to get by weekend if I do I will hook it up and see if I got rpm control and let you know how it goes .. thanks again ..
I can’t get that link to work . Maybe it’s my phone . I will try it on computer when I get off work .
Any idea how to hook up to what I have ? Well I tried to hook the board up and try just the spindle controller part and the board has a 25db male end my cable is a male on both ends .. scratching my...
This board
I have a board like that laying around how would I hook it up any ideas ?
ok what kind and where should i get one im all ears??
Pin 12 on geko to DCM on vfd
Pin 5 on geko to FOR on vfd
Pin 7 on geko to ACM on vfd
Pin 8 on geko to VI on vfd
Pin 9 on geko to 10v on vfd
This works in Mach to turn on and off the motor...
If I jump it the motor comes on stays on no matter what I do in Mach 3 if I wire it like I had it in my drawing it works in Mack 3 on off only no spindle control speed . I guess I don’t really care...
I will try that wiring when I get off work today . Thanks for the effort and help
Yes vfd turns on manually the breaker in my service panel
I got nothing now . Maybe I should get a different vfd ?
Ok here’s what I got as far as hooked up from geko to vfd . They way it is I got motor to power up changed setting in vfd for it to happen pd001 set to 1 and pd002 set to 0 and motor came on threw...
Should I disable relays in spindle set up ?
This is what he sent me not sure where the hook to the geko controller?
Oh and when I try and run the motor I have minimum rpm at 500 and max at 3500 for pulley 1. When I try to run motor it shows...
Here is pic of tag on motor . I have powered it up manually with the vfd I have all axis x-y-z in Mach working . If I toggle spindle switch it lights up but not motor on it’s got to be something...
i have been pulling my hair out trying to run spindle motor its a 3phase on 220v in mach3 have the geko540 controller and a haunyang vfd running a cnc mill... the guy i bought it from had relays...