Hi Alanh,
Yes, usually no one would like to have same experience, this is why Im trying to share all details to be a leaning for others and may be omit this company even they are so sweet before...
Type: Posts; User: zszabo
Hi Alanh,
Yes, usually no one would like to have same experience, this is why Im trying to share all details to be a leaning for others and may be omit this company even they are so sweet before...
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
- - - Updated - - -
Hi,
Here is my story:
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi,
Here is my story:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Hi All,
Here is my experience too:
http://www.cnczone.com/forums/chinese-machines/204866-forum.html
Add 2 bearings on the axe bottom side bracket. The manufacturer mounted just one on top side which alowed the axe to shift up.
Now the 2 will fix the axe and will not allow shifting up or down....
Mounted the locking ring and the new bearing for the ball screw top end
351382
Reported to seller, but of course they dont care about, no answer at all. So the sweet Helen disappaired no answer to email, no answer to skype. Contacted the co. through alibaba, but they agen told...
Hi All,
After 2 years of using the machine (only less than 200h), we run into a "small" issue.
The Z axe has some noise from beginning, but we always thought that probably the bearings. But of...
Today removed all signal wires and found the root cause why the 2 ends of the wires are different :( You can see attached how the wires are prolonged even more times. And of course the there are not...
As the wire size and type is different at breakout board and servo driver we have gone alongside the wires to see where is the change. Opened the wire channel, and as you can see the unshielded...
As the random jumps create a lot of toll breaking today we started to investigate and find the root cause. First we have interchanged the 2 servo drivers, X with Y, but they are differently...
Hi Walo,
I haven't post for a while as my friend haven't used so much the machine. After all the machine works acceptable, but as you see in previous posts it were a long and hard way to update...
The parts looks ok, just he assembly is very chines, so after a refurbishment hopefully will be a good machine.
Here is the summary of the amounts already spent by my friend to repaired the machine.
4 HIWIN Blocks 200 EUR
8 HIWIN Blocks ordered will cost 400 EUR
1 Guiding need to be ordered 100 EUR
...
Received the replacement but the protection is to short,
231656
The guiding has no Hiwin marking
231658
Received just one ball so decided to replace the blocks from axe Y
Complained everything and Hellen where so kind that she arranged and sent replacement parts as 1 Servo driver, 1 guiding, and some small parts.
231648
231650
231652
231654
Drilling holes touched the guidings and destroyed the surface of that.
231640
231642
231644
Noisy Y axe block.
231646
Dirty Blocks, looks like used ones.
231630
231632
231634
231636