wmgeorge,
I am a master donut maker not a Master Electrician like you and would like to know how you determined the current capacity, internal resistance of the terminals, dielectric material,...
Type: Posts; User: joeybagadonuts
wmgeorge,
I am a master donut maker not a Master Electrician like you and would like to know how you determined the current capacity, internal resistance of the terminals, dielectric material,...
CL_MotoTech,
I completely agree, someone like Tormach may take a frosting and many of us would spend the dough for one of these new machines.
Thanks for sharing the dessert.
Live from downtown...
509Maker,
All of my Gumbadi's will be happy to have a inexpensive solution to the G540. If it's ok with you, I will share your work with everyone that does not want to be robbed.
Live from...
Did someone mention doughnuts? Still live from downtown Burbank home of the world famous Cup-O- Joe.
JoeyB
Kfmut,
Your posts are not enhancing or contributing in any positive fashion to this thread, do you have a specific reason for attempting to undermine a member that has a thousand times as many...
Macdowswe,
You are doing a most awesome job regardless of the rumors the guy from the sunshine state is spreading.
Got to get back to the bakery now.
JoeyB
Dixdance,
If your looking for a better solution, take a look at this!
https://www.youtube.com/watch?v=ZMZdCcLQc4M
JoeyB
Fellow CNCer's, "Cake-Nibbling-Customers"
Here are some belt torque rating spec's for future reference.
JoeyB
jfong,
I believe the HTD5M would be more appropriate for your large motor due to the KW rating.
HTD5M 48/12 Teeth W-21mm Pitch-5mm Timing Pulley Belt set kit Reducer Ratio 4:1
JoeyB
jfong,
Maybe the ID of a 8mm pulley can be bored to 9.525mm or 3/8"
3M HTD3M 72T 18T Belt 15mm Timing Pulley Belt set kit Reduction Ratio 4:1 CNC | eBay
I agree with you, it will cost more...
RCaffin &109jb,
Thank you for taking the time to explain in layman's terms, it's refreshing to get a positive point of view.
JoeyB
109jb,
Correct me if I am wrong. Pulleys and belts or some sort of gear reducers would add a lot of cost to this arrangement?
I was under the assumption this was going to be some sort of low cost...
Roger,
Will the encoders I posted work reliably within the r.p.m. limitations of a 5tpi ballscrew?
JoeyB
This 6,000 r.p.m. encoder also looks promising and can be found for $25.00 or less.
See the data sheet for more info.
JoeyB
Mirock,
Next time could you fit a few more screws and washers to hold down the brass. It might come loose during a atomic blast!
Awesome work!
Live from downtown Burbank home of the world...
Macdowswe,
Your work is totally awesome, even better than a triple chocolate custard filled bismark!
I would also like to thank Websrvr for all his generous contributions and personally wish...
Ray,
I acknowledge there is over three thousandths of an inch difference, however the conversation or question is about enhancing the machine's feed rate.
Please, take a minute and loosen up your...
Really Ray,
.19685 lead verses .2000 lead
Did someone deprive you of your morning cup of cappuccino?
Live from downtown Burbank, home of the free endless Cup-O-Joe
JoeyB
Tanks
The download requires a encryption key, any idea what it is?
Live from downtown Burbank, home of the free endless Cup-O-Joe.
JoeyB
91TSiGuy,
Thanks for the super fast reply, I could use one of our donut hole cutters but it might not be good for food service afterwards.
Live from downtown Burbank, home of the endless...
91TSiGuy,
Where did you procure the disc cutter from? I would like the exact same unit.
Live from downtown Burbank, home of the endless Cup-O-Joe.
JoeyB
Dman27,
I second the motion!
Live from downtown Burbank, home of the free endless Cup-O-Joe.
JoeyB
You guys are awesome, thank you.
Live from downtown Burbank, home of the endless cup of joe.
JoeyB
Websrvr
There are many people here capable of coding however you may have to wait until they have time unless you are capable of doing it yourself.
Live from downtown Burbank home of the comedy...
trangt143,
Here is a bit of direction, hope it helps you.
https://diy.haascnc.com/g76-threading-cycle-multiple-pass-group-00-0
Live from downtown Burbank, hope of the endless cup of Joe.
...
AL The Man,
You and all the moderators got to be good putting up with me for the last eight years. Thank you and everyone else your dedication and time sacrifices to make the Forum my favorite of...
Al The Man,
Thank goodness you are here, otherwise I would be totally out of control.:bat:
Keep up the good work.
Live from downtown burbank home of the super deluxe mud pie bismark.
Joey B
The black chair is different than the white chair, which dxf files are you offering?
JoeyB
Kishinevmax,
What is the cost for the chair dxf files?
I would be happy to trade for a few dozen fresh pirozhky.
JoeyB