Search:

Problem Solved!

I have had my lathe for a couple of years now and this is the first time I have had a problem threading. I have it set up to cut 14tpi but it is cutting closer to 15tpi, anyone else run into this...

Any updates?

I also have one and love it. I use it all the time and it works great.

Thanks, I also have the G540 I just was not sure about the connections on the TECO side?

Does anyone know how to wire the TECO VFD to work with Mach3?

I got mine about a week ago and love it. I can`t wait untill I am able to customize the screen. It would also be nice it there was a manual or set up guide for it.

Look here it may help you with this problem.

http://www.cnczone.com/forums/mach_software_artsoft_software/130654-add_usb_lcd_display_%2435.html

Step by step details are listed here:

How to- USB powered LCD display of DRO`s

http://www.pbase.com/astroguy/image/135786264.jpg

I have been trying to do the same. Did you have any luck?

Care to share the file?

I had the same problem with mine and I noticed when I engaged the lead screw it was bending the screw up about 3/16" or more so I shimmed the mechanism down and the problem went away.

Just to be fair to RhinoCam I found the cause of the problem. I got the boss to up date to the latest update and all is well. :-)

Thanks for all the help guys but I just had enough with RhinoCam and did it in Bobcad no problems all done. Thanks again.

You are correct they come greased so just leave them alone and do not oil. On mine I drilled out the oilers and put in greese fittings but still need to box in the rear of the bearings and add greese...

You are right about oiling the spindle, it happened to me and had to get new bearings. I packed them with Mobile one high performance grease.

I'm sorry the hight should be 2.8 not 1.8. The very top does not have to be machined it will be flat.

Fred

Thanks Russell, here is the tool I am using http://www.cnczone.com/forums/attachment.php?attachmentid=124021&stc=1&d=1295190634

The bolt is a 1/4 - 20 with a nut on top and the bolt sticks up...

I tried everything I know and get not get it to work. If someone can look at my file and see what I am doing wrong it would Be grateful.
I zipped the file it is a Rhino 3DM file.

Thanks I will give that a try.

Hi guys I need some help with this. I am cutting a 3 axis horizontal rouging job where the stock is bolted to the table through the center. No matter how I set the clearance plain it still wants to...

Thanks that workd fine, I am going to have to call tech support to see whats going on.

I do not know why it does not work for me I can draw any other shape and it will select it but I still can not select this one. Could you post the file back here with it selected as stock so I can...

Thanks for helping me, the original Rhino file is here http://www.cnczone.com/forums/rhinocam/118254-help_selecting_stock.html#post867579
and it is a good file I must be doing something else worng I...

I will try there forum as well but here is the file as DXF.

Could not get help with the last thread so I am trying again. I do not know why Rhino-Cam will not let me select this file as my stock is there limitations to what you can use?

???:drowning:

Anyone???

For some reason Rhino-cam will not select this drawing as my stock. I can not find anything wrong with the drawing can some one please help!

I don`t know how you did it I have been haggling with them for awhile and only got BobcadV23 mill level 1, dongle, and Videos for $350 now they want $200 for Bobart I told them no way and I was sorry...