It might be a little late, but I just had this same issue, and my problem was related to the "Following Error." There is a solenoid type thing that reads the balance of the shaft? Something like...
Type: Posts; User: GreyFox24
It might be a little late, but I just had this same issue, and my problem was related to the "Following Error." There is a solenoid type thing that reads the balance of the shaft? Something like...
Follow up for people with future issues like this. The problem surrounding this issue was related to the "Following Error." I forget what it directly is called. However, the following error reads the...
I had to break this up. I always have this issue on this site. I will be typing and realize that it skips 80% of what I typed... Anyways
So I have changed a lot of parameters. The maintenance guys...
I have a Fagor 8055T / TC controller on an older lathe. They say it is called an American Lathe. I seen no markings saying what it is. I was given a book for the machine that says Allen Bradley....
I appreciate the help. Thanks.
The original post has all the info. I believe the controller is a GE Fanuc OT-C controller. The manuals are all digital. Covers almost everything Fanuc, but what I have. The closest manual is for the...
Okay. thank you. I will give that a shot. I was doing something like this (this is randomly in the middle of the program):
N600 T0808 S1000 G98
N605 G00 X0.0 Z0.1
N610 G00 Z-0.25
N615 G4 U0.5...
Thanks for the response. I have seen some sample codes, online, say something like that. Only thing that throws me, is that I am using the bar feed at the end of the program, so does that code need...
Well I learned that having single block on will cause this to not progress through the program. I get it to open the collet, use my tool to pull back to where I want the bar feeder to stop at, then...
The company I work for has 2 Hardinge lathes. Both are CHNC styles. I think the other one is a 2 model. Both have 2 different bar feeders. The second machine is down until I get it going. But back to...