Search:

I was able to get it to boot finally. Turned out to be a dead battery but I keep getting a system error.
It will boot the APT program but not the system disks.

Hello,

I'm trying to get a Sodick A280 running.

When the control powers the screen displays:

Number of Files(0-15)?

If I enter any number I then get:

I generally like the 545 by far.

271 or 275 are for thread locking, not sealing.

There's also 565 which is thicker and messier. For pneumatic use 545 is quick and cleans up easy without the...

Listen to Mr. Fizz. The Parker O-ring handbook is an excellent guide.

Go here:

http://www.parker.com/literature/O-Ring%20Division%20Literature/ORD%205700.pdf

Don't use a full ballnose...

Are you serious on the 1/16" ID?

Is that 1/16" on the minor dia. or the major dia.?

A single start thread that small is closer to a straight groove than a thread.

In 304 casting is probably...

Short answer is no. At least not easily.

The main problem is output voltage. Plasma torches operate at around 100 volts as the higher voltage is needed to ionize a pressurized high flowrate...

I haven't tried it but one way would be to use the helix feature and cut a series of shallow V shaped helix grooves around the part. Then reverse the helix direction and do it again.

The grooves...

For gold and silver of 0.2mm thickness why not try using hard urethane as the female die? if the draw is shallow it might work.

You might need to try different hardnesses, but its worth a shot.
...

Hmmm... sounds like Jon Banquer (sp?) cloned himself and added a pinch of disturbed nutjob just for fun.

Somewhat entertaining though, I wanna see where this insanity ends.

How about Loctite?

Just ream the holes a few tenths oversize, and use locktite to hold them in.

Easy to do, clean up any excess and you'll get what you want without any high precision reaming...

well, the white balance is poor.
Reset the white balance and use a bounced flash to get rid of some of the shadows.
Switch to aperature mode and use max aperature for a shallow depth of field to...

Sweet little machine.

Kurt makes a 10" vise but the cost will make you cringe. Anything larger is going to be very cost prohibitive.

A vise for a machine like that doesn't make a lot of...

oops, you posted your nevermind as I was looking for a pic and typing...

I'm not sure if this is what they are referring to, but this is a pic of a piece I made to preload scroll chuck jaws to grind them. It might have to be designed a bit stronger for a hydraulic chuck. ...

This would normally be a illustration of how to ruin a beautiful opportunity for some free marketing, but I think it's either a joke or a phishing scam. This will not be at IMTS unless he finds a...

Yulian:

I will be going to IMTS and would seriously like to look at your product and see if will work for some of the more difficult fixturing applications I have.

I can't find your company...