Search:

Hello, I recently bought a Pratt and Whitney tape drill senior. Before I could get the power connected it lost everything. Do you have the parameters and the diagnostics that you could send me. I...

Hello to my friends in Canada. I need some help with my Pratt and Whitney Tape Drill. My batteries failed and I lost all my parameters and diagnostics. I just bought the machine a few weeks ago....

It is a Fanuc 0-MB I ordered a servo manual from Fanuc. It came today. I have checked the voltages on the pins of the board. The only pin that is out of tolerance is the 20 volt pin. it checks 23...

I would contact Mazak. They have always helped me with information. They could get you back on track.

Hello, I have a Pratt &Whitney Tape drill Senior. I purchased it a few weeks ago. I got power hooked up, but I am getting 401, 414, 424, and 434 alarms. I hit reset the 401 clears out, but the servos...

Hello,
Does anyone have a post processor for a prototrak mx2? I have version 21 Bobcad and this processor is no longer supported on their download site. Any help is appreciated.
Thanks,

I need some help on setting up a Prototrak MX2 post processor for Bobcad version 22. I contacted Bobcad but version 22 is no longer supported. Does anyone have this post? I appreciate any help.

Need help finding a Prototrak MX2 post processor for Bobcad version 22. I contacted Bobcad and they told me it was no longer supported for that version. Does anybody have one that I can download.....

Does anyone know where you can still purchase the nmtb quick change tool holders for the boss mills. what is the proper name for the?
Thanks,
Jodybo

Hello,
I am using bobcad, and when I choose to do a profile, the only way I can get the part to come out is to use offset right, when i generate the code it always conventional mills, I need to...

Gerry,
thanks for the info. My autocad 2000 does not have express tools but it does have explode. I will give that a try,
Thanks,
Jodybo

Hello,
I am doing some engraving on my updated boss mill, running mach 3 software, I have been drawing my images in autocad, but when I add
text to my object and save it as a dxf file open it with...

Hello,
I am going to be starting a new job, and I wanted to ask the forum if anybody had any pages posted for starting up and operating a haas lathe.
I have no trouble programming, I just need a...

I just wanted to let our members know that I appreciate everyone's help
on getting my boss 4 going. The hillbilly board works great! Thanks again Hillbilly! and all others who gave me advice....

Does anybody have a RCK board schematic, I cannot read mine it is illegiable.
I am wanting to turn down my rapid speed, trying to find the right potentiometers to adjust x,y,z down.
Thanks,
jodybo

In mdi I punch in G01 X-1.500 F40, I have tried N1 G90 G01 X-1.500 F40.
Nothing changes the feed rate , I have tried different F values, anytime it feeds the speed is as fast as rapid. I have tried...

My boss 4 is giving me problems when i do a G01 feed command regardless of what feed rate i use the feedrate is the same as rapid. When I turn down the feed overide knob it has no effect on the feed....

Hello,
I was wondering whereon my boss 4 (which board) I could turn my rapid speed down?
I appreciate your help.
Thanks,
jodybo

I will try this when i get home this evening and let you know.
thanks again,
jodybo

I will check this out this evening and let you know. I really appreciate your help. When I do an MDI M25 command Z axis rapids up hits the decelleration
switch then feeds to home position. So maybe...

Hello,
This forum is really helping me get closer to getting my boss 4 going. I still cant get it to feed, but im narrowing it down. The former owner tampered with everything-i need a maitenance...

hello,
I have a boss 4, does anyone know when in mdi mode the proper way to enter a feed rate, since the key pad doesn't have a decimal point? when
i hit the F key and type in 10 (10 IPM) is this...

does anybody have an electrical schematic for a boss 4 cnc mill. I am having trouble with the control recognizing the spindle is on. the machine will move in rapid. i know the feed is inhibited if...

Does anybody out there have a an electrical schematic for the wiring and circuit boards for a Boss 4.
Thanks

I have a boss 4 cnc. I have replaced the transistors in the power supply and all axis will
move in rapid, but when i program a feed rate the machine does not move. I know the
feed is inhibited...