I would advice Hitachi EPP / ETM.
Type: Posts; User: NTCNC9
I would advice Hitachi EPP / ETM.
It’s sure possible but not with common instruments, even Cycle Design offers only the execution for showing the cycle (MDI or PGM save/edit). I believe it’s rather in-house in Heidenhain.
As far I know, it’s possible. But why don’t people just get used to new controllers?
Separate potentiometers have only advantages. And it comes the day when one has to keep up with the times.
For...
Usually it’s possible. Just input a file with Name.D – and you’ll have a zero point table.
So far I know there’s no possibility to picture 45° bevels such as when the milling cutter has real bevels. If you target the whole thing with a cherry cutter, then the graphic will be displayed...
I can’t imagine that.
It has to stand in the DMG-manual in M-functions.
Machine manual?
It’s usually M56 / M57 (on / off) at DMG-machines.
Machine parameters are usually a table with correction values. And I’d rather keep my hands off it.
I would suggest Hitachi ETM or ETMLN
Can hand cutting data in later, they’re in my office.
@DerFräser
And if you try to change it in ProfiCAM?
Stays it the same?
I never set dipping at G00. If I want to dip faster, I declare the 10000th feed motion.
60P is a B/C axial combination, B goes from -4° - 180° and C 360°
Hello
It’s possible only with cycle design if you want to include a cycle into the controller. Otherwise it would work with PGM CALL. Create a parameter program, store it in a folder in the...
You can set G01 as presetting in the tab „position“.
Then it has to work, with dipping as well.
I had the similar problem and solved it in this way.
What is the matter? One can explain very much. But you should write what exactly you need and what possibilities you have…
In principle you shouldn’t mix different hydraulic oils or high temperature greases, even if they have the similar specifications but different manufacturers. The danger of flocculation is very big....
What controller? What does the error message affect? Can you operate the machine or is there an emergency shutdown? During what action does the error occur? Or press the help key and read tips about...
Hello,
I don't know anything about Romicron fine boring tools, but i use the Wohlhaupter Tools too. In my opinion they're one of the best solutions to work with. The next would be the tools from...
Hi ctahko,
Referencepoints can't get lost, one reason could be that the measuring system is broken.
I don't know anything about the Philips 3000 Control, but I know from my TNC430...
Hello Bredaslaw,
In my oppinion there's no problem to get a "cleartext"-output of your programm with WorkNC. This is a matter of your postprocessor. If the setup of your post is right..... With...
Hi Rugrat,
That's cool, that I could help you....thanks for your reply :daumup:
It's not so easy if your technical English is not up to date.... :sorry:
Regards
NTCNC9
Hi,
In my opinion the choice of a CAM-System depends on wich parts you have to manufacture. If you have complex 3d-Parts with a high share of 4-5axis milling it's recommend to buy a more expensive...
Hi Benchmark,
As Carbide said, it's really a tasty thing. We use Pro Engineer as CAD and TopSolid (2 1/2D - 3D), Expert Machinist (2 1/2D - 3D based on ProE), and a German Produkt from the...
Hi Rugrat,
If you want to get the operating time of your Maschine you have the option to make a textfile.
/1 FN 20: WAIT FOR SYNC
/2 FN 16: F-PRINT TNC:\PROTO\PROG\PROTOKOLL.A / ~...