Search:

Did you ever fix this? I am having the same issue.

Have you tried to run those programs in compatibility mode? If not try to run them as Windows 7 you can use this link if you don't know how to How to Set Compatibility Mode for Apps in Windows 10

Thanks a ton for the help! I think I'm going to try out the Geckos g320x for the simple reason that I have dealt with their tech support and they have been a huge help. Once it's done I'll post my...

Apologies I have been away. Please disregard to zip file comment.

My first question would be this, are you stuck with windows 10? I stayed with XP till just a year ago and now I'm on windows 7.

I should be able to help. Put them in a zip file and upload them and I'll take a look. What format do you need?

Here is what I came up with. It is not an exact fit, best I can tell. The holes will need resized some as well as the overall shape may need stretched to get a drop on fit.

The Outlined grid photo...

Perfect I'll post it soon.

Ok one last request. It makes it ten times easier if it has a high contrast. Can you take one last photo of it on a black background. I'll be sure to get it to you before our weekend is over lol.

Is this a trace of the original? If so can I get pic of it set up the same as the outline?

Its at the shop but they are brushed.

I am familiar with Mach3 that's what I plan to use for this table, so step/dir?

Also I can't seem to find and info on how to change the brushes when worn...

So I decided to buy a Gerber Saber 408 used from a large company who bought a new cnc.

So when I got it back to the shop and wired it up the Driver board was or did die.

The part is about...

When looking on Aliexpress.com for ebay.com. Be sure to to spend a little extra for the "mean well" brand. It may cost a bit more but the peace of mind knowing that your power supply is solid will...

Sure I can do that for you.

Can you get me a photo of it on a solid background? Also add tape measure or something to scale it properly, and lastly be sure the camera is square with the guard.

That is why I ended up not using them. I went with a Gecko Driver that could not deliver that high of voltage.

Nema23 stepper motor 425oz.in 23HS9430B, 4leads, 3A,dual shaft, FREE SHIPPING
Nema23 Stepper Motor 425oz in 23HS9430B 4LEADS 3A Dual Shaft Free Shipping | eBay


Here is what the listing says:
...

I put all of these Auctions up for $0.01 with free shipping and No reserve...

I'll just paste the ebay description here:

RM1605 1300MM BALLSCREW KIT W/ NUT + Housing + BK/BF12 End Bearings NO...

Well I played with the CNC a bit when I went home for lunch and it looks like I can do all I need @ 45khz. I cant believe I had it running at 1000ipm and all (even though it was not reliable still a...

Well that makes a lot more sense lol... I just looked back at my ballscrew order and they are 10mm. Ok let me see so 10mm=0.39370079in X 800(rmp)= 315 ipm and 800 (rpm) X 5080...

My steps are 5080 per rev I still dont know how mach3 came up with it but that's the only number that measures out right when I mic it

Ok that's awesome news! What are the pros and cons of the smoothstepper vs UC100... I like the UC100 having already configured and built my controller box.

Oh and my steps per rev are 5080 (mach...

Ok so the weekend testing was bitter sweet.

I got a PC that is a clone of my last PC the only difference on the specs is it only has 1gb of ram as oppose to the 4gb of the last. So I loaded and...

Good info guys! Thanks.

Now does anyone have any ideas as to why my G540 drive is "randomly" going into fault mode?

I put 2 Very robust heat sinks on the G540 and the enclosure is cross ventilated by 2 48v fans.

I am running parallel port, should I just reload fresh with XP 32 bit?

Ok I'll start from the top.

On my X axis I'm running my acceleration @ 30, but am I wrong to assume that since it is stalling mid jog and not during a direction change that acceleration is no...

First I would like to thank Ger21 he has been a wealth of knowledge, but this time I wanted to give him a break from helping me and give you all a chance.
Ok so here is my problem. I am getting way...

Can it be done? Has it been done?

Like I said in the title, I have bitten off more than I can chew, I need to restart gcode using a micro switch. Can anyone give me an idea of where to look or how to do this. I already know that the...

How much are you looking to spend and how fast do you want this CNC to cut? I have a CNC I built that I'm looking to sell it can cut at 40 ipm and it travels: X 35" Y 25" Z 6"... Let me know if your...

Well put it this way... I just installed adobe creative suite on a new HP for a friend of mine, I couldn't even install it on Vista (of course this was a problem with the bundled software not...

I was feeling bad about not saving my money for this... I remeber thinking WOW to good to be true... Well it must have been!!!