Sharp bit is the big key. These are cut in red oak. .125" depth, full cut one pass. 20,000rpm 120ipm. The tree measures 4" overall and the little spots are .050" in...
Type: Posts; User: cfunderburgh
Sharp bit is the big key. These are cut in red oak. .125" depth, full cut one pass. 20,000rpm 120ipm. The tree measures 4" overall and the little spots are .050" in...
Has anyone made the post processor the Axiom Elite series of routers yet? Salesman says he can configure one but never went beyond that. Thank you!
From experience I've learned that the collets that come with most routers are anything but precise. The second issue could be if your router is perpendicular to your table. Manually plunge the bit...
First off I would test cut on something that cuts good like mdf not laminate, that's pretty hard stuff. Second I would look at your tool run out. And lastly check your backlash.
3 axis router 2' x 4' ballscrews
I have a Gecko G540 on the way with a 48v 7.3A powers supply coming with. My dilemma comes about when deciding which motor to use. Sometimes having two sets of steppers can be a bad thing. So here...
Make sure you call your sales Rep before doing any upgrading. Recently upgraded two seats to V27 with Bobart and nesting add-ons for very little cash.
When you start Mach 3 are you starting it using the Mach 3 loader?