Hi All,
I have a strange problem with a Fanuc Controller. The Machine has just been through some major repairs. The gearbox was repaired and also the mainboard on the 31i was replaced. The issue...
Type: Posts; User: BrendanDixon
Hi All,
I have a strange problem with a Fanuc Controller. The Machine has just been through some major repairs. The gearbox was repaired and also the mainboard on the 31i was replaced. The issue...
Hi All,
I hope someone can help me. We have a Doosan 400L CNC Lathe and for some reason we do not have any manuals for it. Does anyone know where I would be able to get manuals and electrical...
G8.5 Is supposed to be on. If it goes off then the CNC Signal resets. I am trying to find out what other signals I need to take a look at.
Hi All further to this. I checked G8.5 for feed hold and this is on.
Hi All,
We had a machine breakdown where we found the I/O Link modules were faulty. We replaced this and also found some shorted wires that we repaired. What happens now is that the cyce start...
Hi We found that it was the communication cable between the spindle drive and controller. Unfortunately everyone did not have the correct cable connections. I eventually worked this out and we made...
Hi all,
We have a hypertherm hpr260xd that keeps burning the shield caps. The machine will do one cut and then will not cut the second cut. When we check. We find the shield cap is damaged
Hi All,
I need some advice. We have a milling machine that came up with a 750 Spindle serial link error. Looking at our controller it has a copper cable between the spindle and CNC controller. We...
Hi All,
UI am wondering is someone can help me with this. We have a Vtech milling machine That has an alarm. Looking at the Ladder R1646.2 is on. But when I look at the logical ladder R9000.1 is...
Hi All,
We have a machine with an A860-2000-T351 encoder on one of the Servo motors. Sadly the operators have gone and damaged the encoder plug and cable. I am not sure if anyone can tell me what...
Hi All,
We have a Zayer Thera milling machine with a Heidenhain TNC 530i control system. the machine is giving an error when trying to do a tool change. I do not know Heidenhain controls at all. I...
Hi All,
I am new to this Section. We have some new Milling Machines with Heidenhain iTNC530 controllers and I need to make backups of all program/parameters and plc program.
I am not sure if...
Hi All
It is a model 0i - D
I did some testing on the machine to see what happens and to prove it to the guy that he must type 4 digits. The turret was on tool 4. I the typed T03 in MDI and the...
Hi All,
I am wondering if you can help me. I have always learnt that in fanuc when calling a tool you will also call the tool offset number
TXXxx where XX is the tool number and xx is the...
Hi lajosgy,
Thanks for your reply. It sounds like you know what you are talking about.
We were having a problem with the turret before that when we select the tool, the tool would rotate to...
Hi,
The machine has a Fanuc 18i control. if I restart the machine the main spindle lights up but the moment I try and select a tool and press the index button (after I have referenced the machine)...
Hi All,
We have a Puma 300LM CNC lathe. the other day I decided to press the C-Spindle button and the light changed from main spindle to C-Spindle now is I press the main spindle button the light...
Hi I also need the Puma 300LM Manual. Could you please email it to me at