Just for info... It does work now. I just set active WCS before measuring to the zero...
It works such way...
(MEASURING Z)
G56 (ACTIVE WORK-OFFSET -> G54-G59)
#105 = 5203+[#4014-53]*20...
Type: Posts; User: hartan
Just for info... It does work now. I just set active WCS before measuring to the zero...
It works such way...
(MEASURING Z)
G56 (ACTIVE WORK-OFFSET -> G54-G59)
#105 = 5203+[#4014-53]*20...
Hello,
I have troubles with touch probe on the CNC machine brother M140X2 with "CNC-C00" controller. I made a macro for touch probe, which save the position via skip signal function, so this is...
i was thinking about that, that is grinding machine, but is fixed clamped.
It is maybe possible changing the tool name there is already defined? Maybe in some other menu?
474511
What of purpose have this? Who know maybe?
474506
474508
Anyway thanks for now.
I tried it, but it does not work ...
A few months ago, I changed the last "NE9" and it changed. I have no idea why it does not work now at all. No one changed the parameters 3210 and 3211. At least not if I knew ...
There is no value for parameter 3210.
I've tried it, but it does not change.
No, NE8 can be changed normally. Only "NE9" does not go.
I hawe a strange problem...
I put "1" in parameter for write. When than I want parameter "3202" to set the bit "NE9" to "0", it tells me "Write protect". I am in MDA mode. How it is that possible?...
Hello,
We are called the service. The belt for B-axis was not tight enough. The servicer was teighten the belt and than run the Cycle 996. The serwicer has worked with version of cycle 996, that...
I have the same problem, I don't know veri god, how Cycle 996 work... I have the problem with positioning sometime between one and oder position when B and C axis.
First position:
328978
...
I have Problem with positioning of Workpiece by programing rotation. I don't know, it is possible, in somwhere parameters put the rotation of part, when is the Part not in the center of rotation?
...
I would have done in such a way as written standard cycles ... My problem is basically just that, to determine the value of the parameter before that, when it comes to the desired sentence ... If it...
That in this case is not important (Z-25)... I need to know how to use the "Stores the Z coordinate at the start of drilling from # 5003"... The "G05.1 Q1 'cause the we do not save the true value of...
I have problem with AI contour Control, when I put "G05.1 Q1" in main program, "#5" in macro is not properly defined. In the example below, should be the value of the parameter equal to 10. In my...
I have tested on the machine. This works perfectly.
I have another question, I do not know how I define "GUD". Where should I define it and how to use it inside the program?
I have to do...
I really thank you for your comprehensive answer, I think this is what I want ... I tested how it works ...
I really thank you for your comprehensive answer, I think this is what I want ... I tested how it works ...
I have the mashine "chiron" with control "fanuc 21Mb". On the mashine the time counter and part counter dont Works. In "Operators manual" have I see, for part counting is the parameter #3901#. I have...
Thank you for your comprehensive reply.
I am interested in something, or maybe you know (you probably know) how the value of the parameter R (R5 = 103) stores, for example on 9th tool offset...
I have the mashine deckel maho 635V with Sinumerik 840D and "Shop mill".
Suddenly my arrow keys in JOG mode no longer work properly ... Whenn I push button for one of the direction (X, Y, or Z),...
Maybe someone knows how to realize the counter to control sinumeric 840D?
Or, for example, how do I do that the program will compare the two correction of ools, and if, for example. H1 of tool1...
I have the program for the heating mashine.
This is the example for fanuc:
%
O7999(WARMING UP)
G0G17G90G80G49
G10L20P40X0Y0Z0
G54.1P40
(RPM ON BEGINNING)
But if he was not properly connected, then it has not worked in the "JOG" mode, or is it?
I can measuring in the "JOG" mode, but when I put the cycle in the program, then don`t work in "automatik"...
Can anyone help me with my problem on our "DMC 64V Deckel Maho Machine" with "Fanuc" controlls?
I need now, how activating the touch probe, before I call the measure cycle.
I need a list of...
On my machine controller does not have these routines (P9010, ...). I have a measurement cycles stored under G2020, etc.. But when I call G2020 in automatic mode, it just does not activate the sensor.