Search:

Hi experts.
I need an advice on machining an 86 inch (2200 mm) long 3½ inch (89.9 mm) acme thread, with ½ inch (12.7 mm) pitch.
We have machined long acme threads before, but never this long. And...

Hi all.

I recently received an old Matsuura MC-1000V, that I’m suppose to set up.
The machine has an old Fanuc 6M control system, but apparently the system don’t have any work offset option.
...

Thanks a lot for your tips!

I will go right out to try it.

Hi.

I'm kinda new into mazatrol programming, and is experiencing a small problem trying to make a .5 mm chamfer at a 18 mm hole, in our Mazak H400.

I want to use an inside chamfering cycle...

G98 mm per minute.

M92 is to enter live tooling

Yes, M50 will lock the spindle on my machine.

M31 is not available.

The value in parameter 5110 is 0

Not in this case.
I'm machining in stainless steel, and have a fine surface roughness requirement. I experience a little shaking, if I don't lock the spindle.

The Y-axis is not moving at all.
The machine is acting like, if you in f/rev mode, is programming a G1 without any spindle rotation.
And if I delete the M50, the program works fine.

Hi all.

I have a minor programming problem using live tooling in my Churchill Omega 65 with Fanuc 18t.

As I am going to mill a surface, using the Y-axis, I want to lock the spindle (M50) But if...

Thanks a lot for your replies guys!

It turned out to be a defect sensor! (probaly shipping dammage) After disconnecting the wire, the machine works fine!

Hi all.

Our company recently bought 4 old Okuma lathes. 2 LR25, 1 LC30 and 1 LC40 but imidiatly after connecting the machines, I got the same problem for 2 of the machines.
As soon as I turn on...

The base system software is 2.34

I'm in china.

The machine is produced in 1997. About the software version, I'm not quite sure. Where can I see this information?

Is it possible that the temperature can course this problem? The temperature...

Hi All.

Our company have an old Cincinnati arrow 1000, with milacron 2100 control system.
We bought the machine second handed, and have had many problems with it!
Now a new problem has come up....