Did you try to change steps per unit? Does the spindle goes as high or as low you say to go?
Sent from my HTC Desire 620G dual sim using Tapatalk
Type: Posts; User: gjokos
Did you try to change steps per unit? Does the spindle goes as high or as low you say to go?
Sent from my HTC Desire 620G dual sim using Tapatalk
Hi,
Did you connected your hardware before installing the drivers? I had the same problem with the ncstudio card. I installed the cylinder drivers and it seems everything to be ok. Try this and try...
I think steps per unit solved the problem, my mistake was that I only tried it with small movement, like 10 mm, so the mistake was small. When I tried with bigger movements of the motors the mistake...
Thanks Russ, will try this, I only tried by manually jogging the machine, not with written command.
Sent from my HTC Desire 620G dual sim using Tapatalk
Is it some parameter in ncstudio, is it wrong SPU, I am confused.
Sent from my HTC Desire 620G dual sim using Tapatalk
I did the file in artcam, I told to cut inside. When reading the code all seems to be ok, in the trace window of ncstudio, when I run the simulation all is ok, right coordinates as it should. When I...
Question: Does SPU (steps per unit) could cause this? Btw when I manually jog, in ncstudio, on axis the spindle goes exactly as much I write. For example if I write 10 mm on x axis, the spindle goes...
Hi all,
I recently purchased cnc router from china it's a machine with ncstudio v8, stepper motors (nema 34), fuling inverter 7,5 kw and yako drivers. I tried to machine simple rectangle 480 x...
I guess 220 V machine is mono phase and this is 220 v machine
Sent from my HTC Desire 620G dual sim using Tapatalk
https://uploads.tapatalk-cdn.com/20170409/2b0344866baf8d720719766ad0338947.jpg
This is photo they sent me from the machine while it was in china, connected and working.
Sent from my HTC Desire...
Hi everybody,
First of all I'm a newbie with cnc machines. One year ago I decided to buy chinese cnc router budget machine I picked my supplier the negotiations went pretty well so I purchased...
Hi ms. Mary,
I recently purchased cnc router from china with ncstudio card (pm53c5) and installation cd with handwritten 8.5 b en. I tried to install it on my windows 7 ultimate 64 bit version...