Where did you get help on the internet for this?
Do you knopw which parameter that will vary the length of the cut? My Y is off by 1/32 with a 2 foot cut and 1/16 with a 4 foot cut.
Thanks,
...
Type: Posts; User: bevins
Where did you get help on the internet for this?
Do you knopw which parameter that will vary the length of the cut? My Y is off by 1/32 with a 2 foot cut and 1/16 with a 4 foot cut.
Thanks,
...
Nexen gives out the rack DXF on their site.
Ger21, you still have those roller pinions?
Have you made any headway? I am looking for this as a solution also. I am not confident that Acorn with the software is a viable solution.
I am just diving in studying the centroid solution. There...
I got them running on a friends machine. They use +-10v. They work well. You would need some kind of board with Mach3 that can do +-10v.
Just my 2 cents.
Thats bad for Masso . I won't be buying from them for sure.
I'll see what I can do. I will have to scan the manual.
Where are you located BTW and what year is your machine? Does it have rs485 relay modules or not?
Are the AZE-cc4q drives controlled with +-10 ? If not, what is the input from controller? I cannot read Itailian...lol
I allready did mine and all motor wiring goes to the drives. There is no encoders on mine going directly to the controller. From the Yaskawa drives, it went to the controller. I removed them and...
He is going to use Linuxcnc, no need to change out encoders. They work fine, The drive gets the encoders, then output to Linuxcnc. I did one of these machines and had no issues.
I had the majority of the machine converted to linuxcnc in about3.5 weeks. I am working on a toolchanger scheme with spindle selection. It is 75% completed. Not that hard. Have to remap Tn M6 through...
It was jumped and it is working on his machine now.
olanfnz,
3 weeks working 10-12 hours per day.
The control if you have rt480 is useless these days. If you only want to do squares holes and circles it may do.
But if you want to do major ...
input 58189 Violation of left working area. I think thats it. Check your module 10 on the machine chassis.
I dont know, its all in french so I may be missing it but I checked and couldnt find it.
Its probably the mesh guards.... but they are jumped out on your machine.
Find the input in the schematics, get the module number and check to see if it is true. (light for input is on), then remove the wire.
Hi olanfz,
I only work with Linuxcnc so I cannot answer about any other control, so I will stick with LinuxCNC. You will have to make a decision on what you want to use.
I can give you these...
I got the manual,
Thanks,
Bob
Did you ever get your Rover 20 upgraded?
I have a solution if your still interested. Pm me.......
Not true.
I got a Rover 346 with the intention on changing out the control. When I started three weeks later I cut my first job. Cost is about 1000.00 for motion control and IO boards. Machine is...
First job completed on the new machine. The machine is not finished yet but couldnt say no to this little contract.
Machine ran real nice and smooth. More accurate than i can measure. I quoted...
A diffective module is in the mail but i am looking to upgrade the control and need the electric plant manual.
Am willing to pay for it.....
Yes most machines are different. However, Biesse...
Cut my first pieces on the BS 346. Wow what a machine. I was 64th inch off @110" will regulate that tomorrow. Just a matter of scale for that axis.
Now, to do the ATC....
I do not know the UCCNC or whatever that controller is...lol, I use Linuxcnc and it is working amazing. Took me three weeks about to convert and 1000.00 worth of hardware.
I am cutting my first...
Most of the retrofit is done. Will post some more pics during the process and schematics when I am finished with them.
All that is left is the Automatic Tool Changer. Everything else is...
Hi,
Anyone have access to Biesse Rover 30 L2 with XNC controller electric plant manual?
Desperately need this manual.
Yes I see that. Where in Canada? Montreal?
Frank, Where are you located in Canada?
Figure out the startup relay logic and starting to transfer wires.
Alot of relays. 110 relays. Good thing I can reuse the existing relays with all the wiring intact.
...
George is not a scam artist. Far from it. If he is not answering you something is going on. He usually answers me within a few hours, all the time.
I haven't spoke with him in a while so I do not...
0-10v or 0-5v connects to pin 2 and 5. Look at page 77 of the manual. pin 5 is common and pinw is 5 or 10v.
Make sure you set the [parameters in the inverter to which you want to use 5 or 10 volts.