Search:

i'm looking a getting the same thing for a rebuild 16mm rail. Do you think that 16mm is large enough to support 1200mm on the x and 2400mm for the y? i'm just asking becouse i don't know, i use v...

is it up and running? i'm look at building one just like yours this winter, this willl be number 3 and the last build i hope.i would like to see how yours turns out.
i was thinking of using the...

i think i can make that work. i was looking for the hand on the sign.

thank you
[email protected]

some one have a finger pointing sign?

thank you, that fixed it

kevin

can someone help me. i have vcarve pro and i'm trying to do a tool change on it. i have .25 end mill as tool 1 and V90 bit as tool 2 in vcarve pro. all loaded into one tool path. but when i run the...

have you seen CNC Stepper Motor Driver Systems & Hobby CNC Routers:: PROBOTIX™ I have it. don't know if it's good or bad but they have been very good to me.

kevin

what size stepper motor do you have on their? and are you getting a little slack or wiggle in the axes(like .062" or so) with the belts. i have mine on a #25 chain and have been thinking hard about...

did you get an answar i have the same quetion

just so you know i have 4 differint parts at this time, but cutting 4 of the same part would be nice thinking about it.

kevin

so do i leave the M5 code and M30? do i put the

thank you for your help

i would like to know how to set up multiple jig on my table and run them from one gcode using the g45 to g59. can i see an examlpe of one please. this is the beginning and end of one of mine g...

Two of my homing switches are acting up the light in the diagnostics page flicker sometimes, it’s never happen be for in 2 year of running it. I have shielded wire checked the switch for them...

someone have a eagel head or and eagle flying for v carving?

kevin

ok. now the question is, i can't load a .75in and a .125in bit in the same gcode to do a tool change. can i still use the tool change fearture after i load a new gcode say the .125in( i just ran the...

isn't there away to zero the second tool you run, with out zeroing off the part agean? using the plate on the table. (i see your from michigan, i'm in boyne city)

can you do the tool change with out having two tools loaded in the g code? i would like to be able to do this with out rezeroing (i woun't to use the plate on the table)

kevin

has someone used this stuff for v carving and then painting ( is it the right stuff to get that the real question i'm asking)


Amazon.com: 1 Roll - 6" x 300 ft Vinyl Clear Transfer Tape for...

can someone tell me if this stuff has worked for them

Amazon.com: 1 Roll - 6" x 300 ft Vinyl Clear Transfer Tape for Craft, Cricut & Sign Vinyl - V0800: Arts, Crafts & Sewing

trying to find...

someone know a good settings for the CV in 2010 screen i don't know alot about it. I have read a little on it. i'm look at running my cnc i little fast, i have mover my velosity up to 100( it was at...

yet me know how it works

i have a question about painting signs, i'm make a little sign for family i'm traying to paint the letters. the letters are v carved and there are some are profile cut out(poping out .25"). i'm have...

how do i set the laser grid? i put my numbers in on the setting page but it stills going to some 4.?DRO and i have it set at 2in. can someone help please.

nice work, i'm not to that point yet

is there a setting that will vector the middle of the color instead of both sides of it ( i what to bitmap vector a map) or i'm i just doing it wrong?

thank you

what kind of wood are you using?
kevin

some one have the P.O.W, M.I.A flag vector?

kevin

i;m doing inlays and the two part are very close but i'm looking to get a little bit closer. well playing with cv setting help? if yes what are your setting? i know little on this. and i have'nt...

up date
ok got it on the deck top now, new problem all my home switches and prode switch are not working ( they did work) but E stop still works
can you help?

kevin

can some one tell me what this means
the volume c:/ is currently unavalable, please select another

it download just fine on my labtop but having problum downloading to me deck top the PC running...