The problem was a leak in the back end of the spindle when using the thru spindle coolant. Service tech finally fixed it.
I've got no idea what the fix was but it's done
Type: Posts; User: Turning_Guy
The problem was a leak in the back end of the spindle when using the thru spindle coolant. Service tech finally fixed it.
I've got no idea what the fix was but it's done
Hi all,
Problem solved. We finally got our machine back online last week. Our coolant issue is fixed ( FINALLY! ) and the machine is good to go.
Okuma Wiz...thanks for your help. I put my...
Hi all,
I have 2 Mazak VTC-20 CNC mills in the shop. 1 has the Mazatrol Fusion 640M control (Windows based)
and the other is a Mazatrol M-Plus control.
Both machines have ISO compatibility and...
Hi all,
Thanks for your help. I have a lot of info to sort now and will try these thing once to machine is back online a it's still down for service.
I hope I have no troubles like the last few...
Ok but rcs60 is correct, you need to recalculate your intersection points also.
Thanks OkumaWiz. I'll try this when the machine is back online.
Cheers!
Hi all,
Does anyone out there have any further input/insight on this programming issue?
I would appreciate any help I can get.
Thanks
I see the file now but I am no able to open it. Thanks anyways
You are sorry for? Is it that you don't have any further info?
No worries.
The line with U0.04 W-0.04 is a retract clearance? Can't make this move in G2/G3. Change to G1.
You are trying to make a 10.0988" radius on this small part and want to change it to 8"
Please...
Also machine type,control type, sample of program in machine would be of help.
Dave
Hi,
Does this mean you have attached a file? If so I can't see it.
Please advise.
Thanks
Ok sounds promising. Can you explain how I select the subprogram(s)? I have 4 or 5 I want to work with. I can't find anything in the manual other than how to select the main program and the...
Hi,
Perhaps I'm not using the correct terminology as I'm still new to the machine. The program is in the machine memory but maybe not called a library file. Is there such a thing?
I have...
Hi all,
The question I have is regarding running a program from memory.
I tried running a program with subprograms and I keep getting ERROR 5212 Subprogram name 1 'CALL 6601'
O6601 is the...
What kind of machine and control are you using?
Some machines require the tool# and M6 on separate lines, some don't use the M6. It looks like you're 2nd T# is a pre-call for the next tool.
Hi all,
I have 2 Mazak VTC-20 CNC mills in the shop. 1 has the Mazatrol Fusion 640M control (Windows based)
and the other is a Mazatrol M-Plus control.
Both machines have ISO compatibility...
Are you looking for free software? I use something called NCNetlite. It's free off the web and works via RS232 cable.
The feed is like that due to synchronized tapping. The feed stays the same regardless of the speed because it's synched to the rpm. Much easier to program...no changing feed when you change rpm.
Hi all,
I hope someone can help me with a problem here. We have a machine in house a Cincinnati Milacron with the Acromatic 850SX Control. I have been in this shop for 6 weeks and they are asking...
Thanks for the suggestion, I think that is the route I will take if my latest efforts don't pan out.
Did you find your material? If so where? Check out www.frasers.com if not...they have a few links to suppliers there.
In response to your bit organizing issue, I am not sure whether or not your tools come in a plastic box or sleeve or not but in my old shop we would have the identifying information marked on it....
Hi all,
Major problem as you see. No parameters and no back-up in house. The machine is an auction buy, about 21-22 years old.
The communications were trying to be set up and when I started...
Hi all,
This is my 1st post here and I hope I'm getting this right.
I have just started at a new shop and they have a Nakamura-Tome TW-20 lathe with a Fanuc OT-C control ( Found it in the...