My battery backup recently died on a fanuc 6m with an upgraded memory board (no longer bubble memory). I re-entered parameters manually and everything seems to working fine except that I cannot...
Type: Posts; User: ross33912
My battery backup recently died on a fanuc 6m with an upgraded memory board (no longer bubble memory). I re-entered parameters manually and everything seems to working fine except that I cannot...
Mick,
Same thing happened to my Leadwell V40 with Meldas M50 control. Dang battery! I have everything back to normal except for my tool changer. When I try to load the tool change program to the...
Trying to revive this old thread. Finally broke down and had a tech come out and fix the tool changer. Turns out, a needle bearing was shot. Now, I have yet another issue with the tool changer. No...
Mori is telling me they won't give me any info without a serial number!!!
I bought my machine used and have never had the correct manual for it. I am needing to do work on my tool changer but do not have the manual with my Yasnac MX3. Furthermore, I can not find the serial...
That is pretty amazing, however we use CATIA. Some of the parts we have I am not able to "rebuild" in the sheetmetal workbench
I am in need of help with developing a flat pattern layout given a 3D model. The company I work for does a lot of hydro and bladder press forming. Most of what we do is complex forming on at least...
TROUBLE SHOOTING
Q. EMPTY POT NOT FOUND.
A.
1.MDI MODE
2.PRESS SETTINGS F8 SOFT KEY
3.PRESS SETTINGS F2 SOFT KEY
4.KEY DOWN TO 6219
5.CHANGE TO 1 BY PRESSING 1 THEN WR
Bad power supply. Replaced it that evening, luckily someone here in town had a used one.
I have a 1987 MV40 with Yasnac MX3 controls. The controller is shutting down after running fine for a few minutes. When it shuts down it throws up a long list of alarm codes:
Just yesterday it...
I have a 1998 Leadwell v40 with a mitsubishi meldas 50 controller. Today it is not letting me put a tool into the spindle. I have no idea what the deal is. It looks like the clamping mechanism for...
What exactly does the gap settings tab control? I know that by using "distance" when ball nosing and increasing the distance under "gap size" can keep the ball nose from lifting up. What, if...
Sure enough, all the options I have been searching for were right there. I guess I just never "expanded" the "Linking" tab to see the entry and exit tools. Wow this makes life much easier. Thanks...
i'm using x5. I am going to mess around with the entry and exit and see if I can get it to do what I need it to do. I must have overlooked that tab. Thank you for point me in the right direction...
I do alot of programming for a 5 axis DMS router cutting sheetmetal parts. I am looking for a better way to lead in and out on my 5 axis operations. For example, when I cut a part profile, I want to...
worked like a charm! I was trying to use circle mill with the circle geometry and not the center point. Thanks for the help!
First post in the MasterCam section and I am needing help. I am using X5 and I am drilling a couple holes with a 1" drill then I am wanting to drop back into that hole with my .971 end mill and...
Thank you, I appreciate the input!
Ok, once i get my BP series 1 Boss 5 running, (z axis won't move and spindle will not turn on) of which I am trying to do as much research as I can to fix this, I was looking into buying a Behind the...
The big red button is not on or anything. It never came on at any time but ut does work, at least when i hit e stop. that is why I am not 100% sure I limited out... Maybe a power feed motor went tits...
I was able to crank z up by hand with the machine off by spinning the dial at the bottom of the servo. When I got close to the top I flipped the machine on to see if I could bring it up the rest of...
thanks for the help gus, it looks like that is what i might have to do...
I just got an old bridgeport series 1 CNC up and running, revived it from the dead (had been sitting over 10 years). I was playing with the axis and everything was working great. I think I moved Z a...
I was wondering if anyone could tell me what kind of travel in x and y my machine is suppose to have. It is a 1987 Mori Seiki MV40 with Yasnac controls. Right now I have about 23.5" in X and a little...
I looked in my controller and there is no tape reader to be found. Now what can I do? Upgrade memory?
Dang, that is what I was worried about. Thank you Bill for the help. Now, my next question is, where can I get a behind the tape reader? And would it be better to just upgrade my memory. Has anyone...
I still can not get this thing to drip feed. Now I am trying with Mastercam X editor and am having no luck. I know I have baud rate and parity right because I can input the program to the control...
it doesn't need the m06 to register the tool and comp for it?
is there any easy way to shut off the ATC so that I can manually input tools and run the machine until I can get the tech out?
thank you for the help underthetire, I really appreciate it. Calling the tech in the morning.