Is it possible the monitor to makes all of the problems I have?
Because sometimes the numbers on the monitor moves, and after a while the monitor stabilizes.That hapens every time I start the...
Type: Posts; User: zenon564
Is it possible the monitor to makes all of the problems I have?
Because sometimes the numbers on the monitor moves, and after a while the monitor stabilizes.That hapens every time I start the...
The same problem again.The machine powers up and stays on for about 2 minutes and then shuts down.When I try to turn on again,she doesnt want to.There are +24vdc on the power supply that are...
Thanks for the help :)
I tried what you sad.I pulled out the 24vdc one at a time and when I tried to power on the machine she didn't to that.I connected the 24vdc like they were.I disconected the 5v...
No it's not the motor. I suspect in the power supply.
In the schematic of the machine it says magnet unit containing magnet connectors.
The machine turning on at all.I mean she isnt powering on.
The sound comes from the magnet unit,Is it possible,the magnet unit to be broken?
Hello I have Fanuc 6M Stama mc 110.I have a problem.When I turn the machine, after a while aproximatly 10 minutes the machine turns off and on the power input unit there is a RED LED diode that turns...
Hello I have stama mc 110 cnc mill with fanuc 6m.
My spindle velocity control number is A06b-6044-H008 with top board A20B-0009-0530.
My spindle top board with number A20B-0009-0530 is now broken....