It is advisable to add a schottky diode with low VF value, for example an SS36, to
be able to connect the USB cable for updating the firmware and changing
parameters even with the lathe connected
...
Type: Posts; User: turbina
It is advisable to add a schottky diode with low VF value, for example an SS36, to
be able to connect the USB cable for updating the firmware and changing
parameters even with the lathe connected
...
I am happy :) to announce that the new updated firmware V1.62 includes add some turret calibration parameters, bidirectional rotation of the turret, parameter display with p99 and support for SYNC I...
no, unfortunately the documentation I need is not available at the moment and trying is not very wise
Message for FreakCNC and Ncrazyballa:
DM3000 Old SKIP Controller is replaced by Mach3 + EZ-DM3000, the rear electrical panel does not even open, the SKIP Controller is disconnected and the...
To do into firmware
I finally found the value of quartz, case closed
So if I understand correctly it seems that sometimes the movement from left to right of the Z axis is missing, to understand if the motor stall or if the movement is really missing you can hear the...
On my site on the home page you can find all the contact information: email and Telephone number for Whatsapp
I'll contact you through PM for details
Initially I wanted to do it bi-directionally but to avoid a possible rotation error I concentrated on the clockwise rotation only, now years later since I never make errors I will also add the...
Yes, kit is available
Done, thanks for your quick help !!!
Thanks to your indications I have restored a CUT220, now I just have to set the correct language,
I have seen that in C: \ CU91 \ CU91MES.MES there is the language of the buttons, labels and...
The pin here goes into the microcontroller on pin 12, has a 10k pullup resistor and currently has no function and should be kept unconnected
VRReels It does not seem that you have private messages enabled, enable them or contact me via email
I'll contact you through PM for details
I understood these things about the code on the backed ram:
PM020BS3016NH-0X
PM = PERSONALITY MODULE
020 = 20AMPERE
BS = ??
3016 = MOTOR FRAME H3016 Electro-Craft
N =...
I have U12 8kbytes DS1225 RAM PM020BS3016NH-0X with bad chechsum , I would look for a kind person who could post / post me the .bin copy of this or even another similar version
REPORT:
Hi
Saw the post about the retrofit box for the dynamyte 3000b, lathe and am interested in knowing how it works, we have one at a school and the processor battery died and it lost its memory...
The interfaces are availables
The interfaces are exhausted, for next month I will do other 5 :)
New User manual released
New user manual release
Thanks Big Chips, this interface will make the retrofit of an original dm3000 an easy thing to do :wave::cheers:
Yes, macro for M6 Command is very simple, there are 3 bits for tool selection, 1 bit for strobe to accept tool selection code and 1 bit input as "Command executed"
Now i have finisced
manual is here https://drive.google.com/file/d/1h6EZ-JYvTgYBjkHPl2s_VOqEPW7L-bkG/view?usp=sharing
Yes, the interface is finished, milled some plastic box, now only i must write the user manual , then we Will see here
No, but i feel To write an user manual about this retrofitting solution, included some mach3 setting screenshots
Yes it is finished, The machine work well without evidents defect, now i will doing pcbs from professional PCB service and in short time make ready a kit for DMxxxx machines
The ideal would be to build a toolholder for 2 axial tools so that with the mach3 or the other you can recall the tool by associating of different tooltip corrector
I have always this drive on shelf , if i no found these cristals values i demolish it, there is somebody that can help me ?