Search:

Centerline Because the tool path generated is more efficiently. You get alarms as they should be when running the machine. The less the guy on the floor has to input the less likley there will be an...

I like to use both


http://forum.featurecam.com/index.php

setupsheet.bas

This is the best addin you will ever find for tool list. It gives you an automatic list of the tools used in your current document with the click of the mouse. It will be in HTML,...

Very cool. I did not know about this. It seems its good for only shallow parts though. Still a cool Idea if you do not have a turret.
Thanks
Chris

Geof,
No,I meant I do not see the offset with the tool call in the code.
But I also do not understand the term gang tooling on a single number. I fully understand the idea of using different...

But actually I don't see
:confused:

Thanks Geoff
Chris

Hi,
I thought you had to tell it an offset # when you call the tool. I am really glad you brought that to my attention though because I am trying to get comfortable programming a TL-4 and I can...

Hi,
We just got a HAAS TL-4 Lathe. I have been doing the programming for our Mills for about five years now, but this is the first lathe I will have programmed. At this point my main concern is...

Ok I see everything gets programmed upside down and backwards
that should be fun to keep straight in my head.
Thanks for your help
...

Hi,
We have a new TL-4 and we are trying to use VQC to generate programs for now. When trying to generate program for Two diameters with two outside corner radius the code put out had G42 and G3 for...

Hi
We just got the TL4 and I must say reading this forum has been very helpfull. Haas is lacking in the information department on this lathe and how it is controlled as with the other TL they did...

G53 is not modal
This may be a problem
I dont see why the G80
Why an alarm on a -2.5mm X move (Be sure it is in fact minus)Is the laser on the table Why even move X & Y
I can see moving Z above...

The point is do they convert the other way, if I had a brushless table could I run it on my VF10 wich was made to ruin with brush type

It makes no differance what you set the tools to as long as you use the same thing to measure from to the top of the top of the part for the G54 Z work offset. Alot of people use a one inch block of...

Hi
We have a brush type rotary head and Haas suplied a simple converter to use on our 2006 VF3YT. We also have an older VF10 the the same table works on without adaptation.

Brush Rotary Table...

Hi
How you save it to the floppy does not matter it can be "part.dnc" or "part .nc". The content of the text file is where you need to have the percent sighn followed by the letter O and a number...

Hi
I have a Anayak Hvm5000 I is controlled by Fanuc Drives and Hiedenhien convrsational. We had a small incident with a Z crash into the table and now we cannot get past the message "#05 Axis...

~Hey
When choosing your post. Check the box that says disable macros.That will stop it from generating subprograms.

~speeeeed