Search:

Hi,

If u lost the parameters , then u have to reload it either by the hard copy(manually) or soft copy. If u dont have both for this machine then u have to load the parameters of identical...

hey

first change the battery in machine on condition. Don't change inpower ioff condition. data will be lost.

After changing the battery switch on the machine.
check the machine...

Any body please send me a sample program for Siemens 802D Controller for mazak HMC H20.

Did anybody having ladder diagram for Moriseiki SL6 with Fanuc Controller 6T.I want the details to set the timer values as the values intialized.Please reply me.

Problem: Turret is not properly...

If anybody having the mechanical drawing for B axis assembly of Mazak HMC H25 machine please send to me as we are commisioning our machine.

Thank you,

Worn out ball screw is to be replaced by a new ball screw.What parameters to be considered and altered in Fanuc OiMate TB.
Existing Ball Screw : Ø50 mm ,pitch 6 mm ,2791 mm Lg
BAll Screw to be...

Spindle DC motor gets trips down even running in lower rpm.Field voltage oscillates while running.At idle Field Voltage is 63V and it oscillates between 3 V to 63V while runnning.Is this problem is...

I observed some oil leakage in clamping solenoid.If we set the pressure in 20 kg it reduces to 17 kg in 2 hrs in spindle idle condition.there is no alarm observed.SYstem is Fanuc 6T.Ladder view is...

It trips under load and also in 120 rpm ,2oo rpm.Since the problem occured in night shift, i did't observed the led display.I found motor gets heated up.After cleaning the blower motor heat gets...

In mazak ST60,DC Spindle motor of 45 Kw tripps off frequently in running.motor field voltage is found ok(63V).motor also rewinded recently.Drive is Mitusubhisi Diarol DL-SBZ Drive.Is reason is field...

if anybody got the mech drawings of mazak hmc h25 b axis ,please send to me.

Please anybody give the rs232 cable details and data settings for program transfering in Mazak QT28 m/c with mazatrol control system.

How to view the locked Parameter (#900 series) i Fanuc 6M control?

Thank u very much

x axis motor armature rewinding done twice and poles also refixed twice.is efficiency of the motor get reduced?winding and pole removal routed out only when over heat alarm observed in the machine.
...

anybody send me the G & M code listing for Fanuc 6m - M/c mazak VMC V20 power centre

Actually there is no separate brake on the motor.Only there is a hydraulic plunger to hold the motor when power is off.i also want to know why the hydraulic oil getting heated and it is the cause for...

In St60 Lathe (slant bed) x axis motor gets over heated.It takes 5 amp at idle and 7 to 8 amps while moving.Hydraulic oil gets heated upto 55 deg C.X axis counter balancing is Single port hydraulic...