Hi Scanf,
I would not say that you are screwed, if you need some support or help feel free to call me or shoot me a email to [email protected] . I will see what i can do to give you a hand.
Keith
Type: Posts; User: syil canada
Hi Scanf,
I would not say that you are screwed, if you need some support or help feel free to call me or shoot me a email to [email protected] . I will see what i can do to give you a hand.
Keith
Hi guys,
sorry for my delay. It is true that as of current we are suspending sales for the syil product line. These issues we are having are between us and the syil china. I do appolgize, and...
Sorry for the delay in our reply, it seems that we have missed this thread.
The current non moving tool table will impede 2.2 inches on the x travel. In the next 2 months we will have a full...
If there is anything i can do help, feel free to call me anytime. I will return your call :)
Keith
C/O Syil North America
403-400-7945
Good day,
Thank you for posting and you are correct in your statements. Each dealer in north America are independent dealers for Syil China. This does mean that the service and even pricing can...
oddly enough it is correct, we set it up voip.
haha,
keith
Update:
Syil North America's Nevada office is now Accepting calls (276)-SYIL-CNC or 276-794 5262. We are still in the process of setting every thing up, so please be patient with us.
Our X4...
1.What is the minimum PSI that will run the pneumatics and does this release the tooling under the 1000lbs load you mention?
- The minimum Operating PSI is 60, though 90 is ideal.
2. Are you...
Hi there sorry to here about your problems, the first thing I'd check is the main power switch. This switch works independent of the syil electronics, it is controlled via a small relay. This relay...
If you are still having issues feel free to call me @ 403 400 7945, you got no instructions when you purchased your mill? Where did you purchase your mill from?
Any questions let me know,
Keith
Hi Guys,
I am unsure of all the happenings with Syil America. Though one thing i do know for sure is we @ Syil Canada / North America are more than happy to help any one. If ever there is a...
hello,
Just to keep you up dated, i just got back from china a few weeks back. When i was there one of the things we were working on was the lathe.
Most of the things you you had mentioned is on...
YouTube- Syil's Bolt on power drawbar, for tabletop cnc mills
www.syilnorthamerica.com
HERE IT IS!
YouTube- Syil's Bolt on power drawbar, for tabletop cnc mills
Syil Power draw bar,
We are pleased to announce Syil Canada has engineer the only professional bolt on power draw bar...
YouTube- Syil's retractable 56,000 rpm air spindle
SyiL is pleased to announce the first bolt on retractable high speed engraving spindle, SyiL has been working hard with SyiL Canada to design new...
YouTube- Syil's retractable 56,000 rpm air spindle
Syil's new retractable 56,000 Air spindle, this allows the user to use both the air engraving spindle and the main milling spindle in one...
YouTube- Syil's Bolt on power drawbar, for tabletop cnc mills
Syil Power draw bar,
We are pleased to announce Syil Canada has engineered the only professional bolt on power draw bar system...
Well you all have been waiting a long time, So here it is
YouTube- Syil's Bolt on power drawbar, for tabletop cnc mills
Syil Power draw bar,
We are pleased to announce Syil Canada has...
Hi steve,
A long time ago I had the same issue, what I found Was by changing the parellel cable that better protects from external electrical / magnetic influances, the issue went away.
I hope...
If you would like to give me a call i can give you a hand.
Keith
403-400-7945
The draw bar is done, I am off to china next week to meet with my good friends in china. When i am there we will post some info and such on the draw bar / ATC. Dont worry you all will be the first...
hi mach tech,
through much trial and error, i personally been taught a hard lesson. The more expensive the endmill the longer it lasts, i can increase my depth of cut, and i get a better finish. ...
Good day my friend,
Please send me a email to [email protected] and i will send you the proper set up file for the x4. It is best to use this file and it will save you many troubles. In the past i...
hello,
just send me a email to [email protected] and i can send you the set up file for mach3 as well as instructions how to install it.
any questions let me know,
keith
Hello,
according to my math,
for this cutter i would be @ about
3300 rpm
5ipm
and increase the depth of cut to .06"
I have cut at this depth with this same tooling, though 99% of every...
Good day Len,
I love Inventor it has made me alot of money, though it has also cost me alot of money. One copy of the software cost me 10,600.00 , with that though it also included all of the...
Working away, today we are machining up the last of the parts. I hope to have it 100% complete by this weekend!!!!
We are trying to not rush things, we have already spent hundreds of hours in the...
If you need any other help, just let me know.
Keith
Feel free to email me directly [email protected] I will try to help you out.
Keith
just some cad photos, of the power draw bar. Guess its a teaser, but the real deal to come soon.
keith