I have an old Burgmaster VMC with a Fanuc 6M control. I have had problem with the Y axis for some time either running away or faulting out. I would like to replace or repair the encoder and cable....
Type: Posts; User: bk5
I have an old Burgmaster VMC with a Fanuc 6M control. I have had problem with the Y axis for some time either running away or faulting out. I would like to replace or repair the encoder and cable....
Power off machine
hold these 2 buttons on the control: "Cancel" or "can" and the letter "P"
Turn the power back on while holding the buttons.
Once the power is back on, press home button. Machine...
Hold P and cancel during power up and try to home again.
PROBLEM SOLVED!!!! Thanks to your info I set the timers values and all is good. I answered my own question about which timer value from the manual coensides with what PC parameter. Timer 1 = 1001, 2...
Thanks guys!
I found the PC paramenters. But there are values in there but I do not know which ones to adjust for my turret. I need to set timer 3,4,and 5, for the turret functions according to...
I have the exact same problem on my Daewoo lathe w/6T control. How and where do you set timer values?