We are having some serious problems with our new 6030's
Spindle was bogging down and belts were getting fried.
Also, when using thru spindle coolant, in the middle of the cut spindle would shut...
Type: Posts; User: Admirp
We are having some serious problems with our new 6030's
Spindle was bogging down and belts were getting fried.
Also, when using thru spindle coolant, in the middle of the cut spindle would shut...
That does sound like a brake issue. When your brakes are on position is not being controled by the motor, so if there is any position change with brakes on , it will not show on the screen. If the...
BTW
In Fadal maintenace manual they show you how to configure jumpers for different tables, and according to them on a Tsudakoma tilting rotary table A axis tilts and B rotates, which is...
I prefer to do the offsets the same way as you tarkus. We all use it as a kind of a standard just for the fact that i might not be there one day, and somebody else will need to change tool on my...
D You have to send it home at the end of the program as in line N178 otherwise it will do what you described. Other option would be to cancel out your g55 callout before the end of the program (if...
Here's an example of a program, in format 2 however
O0001 ( PROGRAM - 6964T4 )
N100 G90 ( DATE - 27-02-06 TIME - 12:41 )
N102 G20
N104 G0 G17 G40 G80 G90 G94 G98
N106 G0 G28 G91 Z0.
N108...
Alright, i checked with our Fadal service guy, and only requirement is that the rotary has DC motors.
As i stated earlier, we bought our tsudakoma tables with intent to use them on fadals, and we...
We've had one for about 9 years.
Nobody wanted to deal with it so it sat on the shelf up until a month ago when i started messing with it. It looks like a quality machine, and i'm sure their stuff...
How about Troyke rotaries?
We have a brand new Troyke 5 axis table that we bought to use with our Sharnoa, but we never did, so it's been sitting on the shelf for 10 years now.
Can i just hook...