Search:

Looks like standard HAAS to me. JP

Hi Ata, Look here. http://groups.yahoo.com/group/CNC_Toolkit/messages This is what I use. JP

Look here. http://www.fieldlines.com/story/2007/2/2/03059/10452 and here http://cnczone.com/forums/showthread.php?t=31894 Hope this helps. JP

Hi Dan; No I did not build the machine. It is an old Digital Tool DR903 that I fitted with the "A" axis. JP

Hello All; My XYZA router. http://www.otherpower.com/images/scimages/1803/CNCBlade2.JPG JP

How about direct drive? No measurable backlash? JP

Hello all; Here is a link for airfoil points. http://www.pagendarm.de/trapp/programming/java/profiles/NACA4.html ...

Hello All, I got my new motor mounted and running on the machine with no resistors. It only gets warm, not hot after two hours of running. Any comments? Thanks JP

Hi Jack, Check the top left center of the control panel. My specs look like this. Also my wiring diagram is on the inside of the connection cover. This will give you the info you need to help make a...

Hello All, Here is an image from my Tig 300 manual. Good Luck. JP

Hello all, Thanks for the help. I connected the motor to the driver without any resistors to see if it would run. I got it on Ebay. It ran as expected. I will start out with 90 ohm resistors and...

Hello H500, It is designed for a specific motor. This is about a 1990 model. I think that I can run parallel resisters to bypass .9A but can't find a formula to do the math. Thanks JP

Hello H500, It does, but it is not adjustable without changing discete componants. AA won't give me a schematic. Thanks JP

Hello all, I have an Anahiem Automation "Blue Box" that puts out 80V and 7A. It clips the current at 7A. My present Anahiem Automation NEMA 34 stepper motor is rated at 7A. I have an Anahiem...

CAMCRASH, Here is a link. Download the files that apply, extract them, then open them with notepad. Some of the information may be useful. JP ...

Hello psychomill, Yes it is a 3D toolpath. The toolpath was created with CNCToolkit from a polyline mesh DXF drawing. CNCToolkit is not capable of changing the toolpath to the direction that I want...

Hello All. I have a very large toolpath file. The code makes the machine move from X0mm to X2438.4mm then back to x0mm to X2438.4mm pass after pass. I want the machine to cut in a back and forth...

Yes: I believe they make custom jewelry. The link to yahoo is on the page that the first link brings up.

I don't know why the link changes when I post it. I copied and pasted it from the yahoo site. When I saw that it was incorrect I edited the link manually but when it posts it leaves out the "s'' and...

http://groups.yahoo.com/group/CNC_Toolkit/messages

http://www.rainnea.com/cnc_toolkit.htm and here http://groupyahoo.com/group/CNC_Toolkit/messages

Thanks for the link. I am starting to understand the wiring. JP

Hello All: My stepper driver only has six connections per axis. I want to install an eight wire stepper. Do I wire the stepper unipolar? Thanks JP

I have a Digital Tool router that I want to install a fourth A (rotary) axis on. The steppers are Anaheim Automation 34D314S, 2.2 volt, 7A, 6 lead, four phase hybrid. The driver is an Anaheim...

Hi ger21; I don't know if it is 3D polylines or splines. The drawing is generated with propriatery software. Is there a way that I can figure out if it is 3D polylines or splines, or convert it to 3D...

Hello All; I am new to Autocad. Took a beginners coarse at the local vocational school. I don't know how to render a surface on a 3D wireframe. I need the surface so GMAX can find my object. Can...

Gerry: That is exactly what I wanted. Thanks JP

Thanks Gerry: I will give it a try. JP

Thanks Gerry: I am new to all of the software that is in my post. I have drawn both ways. The origin at 0,0,0 and changed the ucs to 0,0,0. I am not sure if I am setting the UCS correctly. Thanks JP

Hello all: This is my first post. I am trying to draw all of my drawings in Autocad 2000 with 0,0,0 in the bottom left corner which is the zero point for all axis of my router. I create a drawing...